Residual stress measurement in thin films using a slitting method with geometric phase analysis under a dual beam (FIB/SEM) system
文献类型:期刊论文
作者 | Zhu, RH ; Xie, HM ; Dai, XL ; Zhu, JG ; Jin, AZ |
刊名 | MEASUREMENT SCIENCE & TECHNOLOGY |
出版日期 | 2014 |
卷号 | 25期号:9 |
ISSN号 | 0957-0233 |
关键词 | residual stress thin film focused ion beam geometric phase analysis finite element model |
通讯作者 | Zhu, RH (reprint author), Tsinghua Univ, AML, Dept Engn Mech, Beijing 100084, Peoples R China. |
中文摘要 | Stress generated during thin film deposition is a critical issue for many applications. In general, the possible origins of the residual stress include intrinsic and extrinsic stresses. Since high residual stresses can cause detrimental effects on the film, such as delamination and wrinkle, it is of great importance to quantify the residual stress for the optimal design and the evaluation of its mechanical behavior. In this study, a method combining focused ion beam (FIB) milling and geometric phase analysis (GPA) is developed to assess the residual stress of thin films. The procedures of the residual stress measurement using this method include grating fabrication and slot milling by FIB, high-resolution scanning electron microscope (SEM) imaging of the grating before and after stress relaxation, and deformation analysis by GPA. The residual stress can be inferred from the released deformation using the reference displacements of the finite element model. As an application, this method was utilized to measure the residual stress in a TiAlSiN film, and the measured result is in good agreement with that obtained by the curvature method. In order to analyze the measurement error, the influence factors of Ga+ bombardment and the deposited platinum layer on the stress calculation are also discussed in detail. |
语种 | 英语 |
公开日期 | 2015-04-14 |
源URL | [http://ir.iphy.ac.cn/handle/311004/59322] |
专题 | 物理研究所_物理所公开发表论文_物理所公开发表论文_期刊论文 |
推荐引用方式 GB/T 7714 | Zhu, RH,Xie, HM,Dai, XL,et al. Residual stress measurement in thin films using a slitting method with geometric phase analysis under a dual beam (FIB/SEM) system[J]. MEASUREMENT SCIENCE & TECHNOLOGY,2014,25(9). |
APA | Zhu, RH,Xie, HM,Dai, XL,Zhu, JG,&Jin, AZ.(2014).Residual stress measurement in thin films using a slitting method with geometric phase analysis under a dual beam (FIB/SEM) system.MEASUREMENT SCIENCE & TECHNOLOGY,25(9). |
MLA | Zhu, RH,et al."Residual stress measurement in thin films using a slitting method with geometric phase analysis under a dual beam (FIB/SEM) system".MEASUREMENT SCIENCE & TECHNOLOGY 25.9(2014). |
入库方式: OAI收割
来源:物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。