Integrating atomic layer deposition and ultra-high vacuum physical vapor deposition for in situ fabrication of tunnel junctions
文献类型：期刊论文
| 作者 | Elliot, AJ ; Malek, GA ; Lu, RT ; Han, SY ; Yu, HF ; Zhao, SP ; Wu, JZ |
| 刊名 | REVIEW OF SCIENTIFIC INSTRUMENTS
 |
| 出版日期 | 2014 |
| 卷号 | 85期号:7 |
| ISSN号 | 0034-6748 |
| 通讯作者 | Elliot, AJ (reprint author), Univ Kansas, Dept Phys & Astron, Lawrence, KS 66045 USA. |
| 中文摘要 | Atomic Layer Deposition (ALD) is a promising technique for growing ultrathin, pristine dielectrics on metal substrates, which is essential to many electronic devices. Tunnel junctions are an excellent example which require a leak-free, ultrathin dielectric tunnel barrier of typical thickness around 1 nm between two metal electrodes. A challenge in the development of ultrathin dielectric tunnel barriers using ALD is controlling the nucleation of dielectrics on metals with minimal formation of native oxides at the metal surface for high-quality interfaces between the tunnel barrier and metal electrodes. This poses a critical need for integrating ALD with ultra-high vacuum (UHV) physical vapor deposition. In order to address these challenges, a viscous-flow ALD chamber was designed and interfaced to an UHV magnetron sputtering chamber via a load lock. A sample transportation system was implemented for in situ sample transfer between the ALD, load lock, and sputtering chambers. Using this integrated ALD-UHV sputtering system, superconductor-insulator-superconductor (SIS) Nb-Al/Al2O2/Nb Josephson tunnel junctions were fabricated with tunnel barriers of thickness varied from sub-nm to similar to 1 nm. The suitability of using an Al wetting layer for initiation of the ALD Al2O3 tunnel barrier was investigated with ellipsometry, atomic force microscopy, and electrical transport measurements. With optimized processing conditions, leak-free SIS tunnel junctions were obtained, demonstrating the viability of this integrated ALD-UHV sputtering system for the fabrication of tunnel junctions and devices comprised of metal-dielectric-metal multilayers. (C) 2014 AIP Publishing LLC. |
| 资助信息 | NASA [NNX13AD42A]; ARO [ARO-W911NF-12-1-0412]; NSF [NSF-DMR-1105986, NSF EPSCoR-0903806] |
| 语种 | 英语 |
| 公开日期 | 2015-04-14 |
| 源URL | [http://ir.iphy.ac.cn/handle/311004/59641]  |
| 专题 | 物理研究所_物理所公开发表论文_物理所公开发表论文_期刊论文 |
| 推荐引用方式 GB/T 7714 | Elliot, AJ,Malek, GA,Lu, RT,et al. Integrating atomic layer deposition and ultra-high vacuum physical vapor deposition for in situ fabrication of tunnel junctions[J]. REVIEW OF SCIENTIFIC INSTRUMENTS,2014,85(7). |
| APA | Elliot, AJ.,Malek, GA.,Lu, RT.,Han, SY.,Yu, HF.,...&Wu, JZ.(2014).Integrating atomic layer deposition and ultra-high vacuum physical vapor deposition for in situ fabrication of tunnel junctions.REVIEW OF SCIENTIFIC INSTRUMENTS,85(7). |
| MLA | Elliot, AJ,et al."Integrating atomic layer deposition and ultra-high vacuum physical vapor deposition for in situ fabrication of tunnel junctions".REVIEW OF SCIENTIFIC INSTRUMENTS 85.7(2014). |
入库方式： OAI收割
来源：物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。