Application of error detaching to Ritchey-Common test for flat mirrors
文献类型:期刊论文
作者 | Zhu S. ; Zhang X.-H. |
刊名 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering |
出版日期 | 2014 |
卷号 | 22期号:1页码:7-12 |
ISSN号 | ISBN/1004924X |
英文摘要 | To improve the accuracy of Ritchey-Common test for a flat mirror, a new method to use the relationship between the system pupil coordinate and the test mirror coordinate to interpolate and fit the test mirror surface was proposed. On the basis of the least square method, the system defocus error and surface error in two test angles were detached to gain a more actual flat surface error. The simulation analysis shows that the test error can be controlled under /100(=632.8 nm). A flat mirror with a diameter of 40 mm was tested. In the test process, the test flat mirror was rotated with different angels and the wavefront was reconstructed through the relationship between coordinate mapping and amplitude conversion. The obtained results show that the RMS of the test mirror surface is 0.018 6 after detaching the defocus error of the system. As compared with the test RMS of 0.021 from an interferometer, the residual error is 0.002 4 . Experiment results indicate that this error detaching method is valid and accurate in the Ritchey-Common test for flat mirrors. |
收录类别 | EI |
语种 | 中文 |
源URL | [http://ir.ciomp.ac.cn/handle/181722/43749] |
专题 | 长春光学精密机械与物理研究所_中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Zhu S.,Zhang X.-H.. Application of error detaching to Ritchey-Common test for flat mirrors[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2014,22(1):7-12. |
APA | Zhu S.,&Zhang X.-H..(2014).Application of error detaching to Ritchey-Common test for flat mirrors.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,22(1),7-12. |
MLA | Zhu S.,et al."Application of error detaching to Ritchey-Common test for flat mirrors".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 22.1(2014):7-12. |
入库方式: OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。