中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Study of tilt axis bearing arrangement for M3S of TMT project

文献类型:会议论文

作者Zhang J.; Zhang J.; Zhang J.
出版日期2014
会议名称7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, AOMATT 2014, April 26, 2014 - April 29, 2014
会议地点Harbin, China
英文摘要The tertiary mirror positioned assembly (M3PA) of the thirty meters telescope (TMT) is the largest tertiary mirror pointing system in the world. The tracking and pointing performance of M3PA is better than any other telescopes which have been built, and the working condition is even worse, so the designers face an enormous challenge. The tracking system includes the bottom rotator shaft and the tilt shaft. The study of this paper focuses on the tilt shaft. There are mainly three forms. The first form is one end fixed with the other unrestrained in axial direction. The second form uses two pairs of angular contact ball bearing. The last form lays two tape roller bearings. All of them can meet the requirements when the M3PA is vertical. But the first one becomes invalid when the M3PA is horizontal. We pay our attention on the study for the second arrangement method. This bearing arrangement can produce a good stiffness, and increase the first modal frequency to 15.1Hz. In addition, some analysis were down to study the load applied on the balls. The results show that the maximum load is up to 5000N with the stress of 2300MPa. 2014 SPIE.
收录类别EI
会议录7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, AOMATT 2014, April 26, 2014 - April 29, 2014
会议录出版者SPIE
会议录出版地Harbin, China
语种英语
源URL[http://ir.ciomp.ac.cn/handle/181722/44623]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714
Zhang J.,Zhang J.,Zhang J.. Study of tilt axis bearing arrangement for M3S of TMT project[C]. 见:7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, AOMATT 2014, April 26, 2014 - April 29, 2014. Harbin, China.

入库方式: OAI收割

来源:长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。