Characterization of Precipitated Carbon by XPS and Its Prevention Mechanism of Sticking during Reduction of Fe2O3 Particles in the Fluidized Bed
文献类型：期刊论文
| 作者 | Zhang, Ben1,2; Wang, Zhi2; Gong, Xuzhong2; Guo, Zhancheng1,2 |
| 刊名 | ISIJ INTERNATIONAL
 |
| 出版日期 | 2013 |
| 卷号 | 53期号:3页码:411-418 |
| 关键词 | fluidized bed Fe2O3 particles prevention of sticking pre-reduction graphitic carbon Fe3C |
| 英文摘要 | The Fe2O3 particles with the diameter between 74 and 150 mu m were pre-reduced with CO at 923 K to precipitate the carbon on the surface. Then the particles were reduced by CO at 1 173 K in the fluidized bed for examining the efficiency of the precipitated carbon for preventing the sticking. The result showed that the sticking of particles with high metallization ratio could be retarded or prevented by the precipitated carbon. For clarifying the prevention mechanism of the sticking, the carbon in different states was characterized by X-ray Photoelectron Spectroscopy (XPS) and its effects on sticking were discussed. The carbon on the surface was divided into two states, the graphitic carbon and the carbon in Fe3C. On account of the sticking of Fe3C at approximately 1 054 K and the sticking of the sponge iron at the micron scale, the structural change of the precipitated iron by the carburization and the formation of Fe3C only retard the sticking. Therefore, the prevention of the sticking at 1 173 K was attributed to the graphitic carbon. Due to the formation of metallic iron layer avoiding the consumption of the carbon and the formation of Fe3C restraining the dissolution of the graphitic carbon, the graphitic carbon accumulated on the surface of the particles, resulted in n(c)/n(Fe) above 1.0, so that Fe3C and the metallic iron was coated by the graphitic carbon to block their contact among the particles. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Metallurgy & Metallurgical Engineering |
| 研究领域[WOS] | Metallurgy & Metallurgical Engineering |
| 关键词[WOS] | FINE IRON-ORES ; SULFUR PRESSURE ; KINETICS |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000316776500005 |
| 公开日期 | 2015-05-27 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/13414]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 作者单位 | 1.Univ Sci & Technol, State Key Lab Adv Met, Beijing 100083, Peoples R China 2.Chinese Acad Sci, Natl Engn Lab Hydromet Cleaner Prod Technol, Inst Proc Engn, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Ben,Wang, Zhi,Gong, Xuzhong,et al. Characterization of Precipitated Carbon by XPS and Its Prevention Mechanism of Sticking during Reduction of Fe2O3 Particles in the Fluidized Bed[J]. ISIJ INTERNATIONAL,2013,53(3):411-418. |
| APA | Zhang, Ben,Wang, Zhi,Gong, Xuzhong,&Guo, Zhancheng.(2013).Characterization of Precipitated Carbon by XPS and Its Prevention Mechanism of Sticking during Reduction of Fe2O3 Particles in the Fluidized Bed.ISIJ INTERNATIONAL,53(3),411-418. |
| MLA | Zhang, Ben,et al."Characterization of Precipitated Carbon by XPS and Its Prevention Mechanism of Sticking during Reduction of Fe2O3 Particles in the Fluidized Bed".ISIJ INTERNATIONAL 53.3(2013):411-418. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。