Effect of Titanium Content on the Microstructure and Mechanical Properties of Tungsten-Titanium Alloy
文献类型：期刊论文
| 作者 | Wang Xing; Duan Dongping; Guo Yunshu |
| 刊名 | RARE METAL MATERIALS AND ENGINEERING
 |
| 出版日期 | 2013-06-01 |
| 卷号 | 42期号:6页码:1108-1112 |
| 关键词 | powder metallurgy titanium content tungsten heavy alloy dynamic mechanical property adiabatic shear banding |
| 英文摘要 | Tungsten heavy alloys (WHAs) with four different titanium contents (0.5%, 1.0%, 1.5%, 2.0%, wt.%) were prepared by powder metallurgy. The influence of titanium content on the microstructure and mechanical properties under high strain rates were investigated. The results show that the titanium particles disperse in the matrix with different morphology and the main effective element is the diameter of the titanium particles. There are lots of micro holes in the titanium particles when the diameter of titanium particles is larger than 20 mu m. The titanium particles do not dissolve in the matrix during the sintering process and the interfaces between titanium and tungsten, titanium and matrix are good. The results of Hopkinson Striker Bar indicate that the dynamic compressive strength is highest when the content of titanium is 0.5% and the strength has little change as the content of titanium increases from 1.0% to 2.0% under 3700 s(-1) strain rate. In the WHA with 2.0% titanium content, the adiabatic shear banding (ASB) is the main deformation mode and the titanium in the ASB is fragile, the temperature of thermal softening area is higher than that of the traditional WHAs because of the existence of titanium particles. The addition of titanium in the WHAs improves the adiabatic shear banding susceptivity. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 研究领域[WOS] | Materials Science ; Metallurgy & Metallurgical Engineering |
| 关键词[WOS] | HOT-HYDROSTATIC EXTRUSION ; ADIABATIC SHEAR-BAND ; SUSCEPTIBILITY ; TORSION |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000321474500003 |
| 公开日期 | 2015-05-27 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/13536]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 作者单位 | Chinese Acad Sci, Inst Proc Engn, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang Xing,Duan Dongping,Guo Yunshu. Effect of Titanium Content on the Microstructure and Mechanical Properties of Tungsten-Titanium Alloy[J]. RARE METAL MATERIALS AND ENGINEERING,2013,42(6):1108-1112. |
| APA | Wang Xing,Duan Dongping,&Guo Yunshu.(2013).Effect of Titanium Content on the Microstructure and Mechanical Properties of Tungsten-Titanium Alloy.RARE METAL MATERIALS AND ENGINEERING,42(6),1108-1112. |
| MLA | Wang Xing,et al."Effect of Titanium Content on the Microstructure and Mechanical Properties of Tungsten-Titanium Alloy".RARE METAL MATERIALS AND ENGINEERING 42.6(2013):1108-1112. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。