STRUCTURAL CONTROL OF NA(2)TIO(3) IN PRE-TREATING NATURAL RUTILE ORE BY ALKALI ROASTING FOR TIO2 PRODUCTION
文献类型：期刊论文
| 作者 | Meng, Fancheng1,2 ; Liu, Yahui1; Chu, Jinlong1; Wang, Weijing1,2; Qi, Tao1
|
| 刊名 | CANADIAN JOURNAL OF CHEMICAL ENGINEERING
 |
| 出版日期 | 2014-08-01 |
| 卷号 | 92期号:8页码:1346-1352 |
| ISSN号 | 0008-4034 |
| 关键词 | TiO2 production natural rutile alkali roasting structural control crystal form |
| 通讯作者 | Qi, T (reprint author), Chinese Acad Sci, Inst Proc Engn, Natl Engn Lab Hydromet Cleaner Prod Technol, Beijing 100190, Peoples R China. |
| 英文摘要 | To improve the use of natural rutile ore with fine particle size and high contents of MgO and CaO in China, a novel pre-treatment method of natural rutile ore by NaOH roasting to prepare -Na2TiO3 for TiO2 production was proposed. -Na2TiO3 is a stable by-product that can lead to serious caking in the reactor and low titanium yield. Thus, structural control in alkali roasting is necessary. The influence of particle size of natural rutile ore, NaOH-to-ore mass ratio, roasting temperature and roasting time on the crystal forms of Na2TiO3 was systematically investigated. The optimized reaction parameters were as follows: average particle size of natural rutile ore, -9.2 mu m; NaOH-to-rutile mass ratio, 1.2; roasting temperature, 550 degrees C; and roasting time, 70min. In these conditions, the titanium conversion and the fraction of -Na2TiO3 exceeded 99.5% and 98%, respectively. Moreover, the addition of H2O or as-prepared partial -Na2TiO3 as crystal seeds into the reaction system could prepare the roasting product with -Na2TiO3 as its main phase using -45 mu m (-325mesh) natural rutile ore. |
| 学科主题 | Engineering |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Engineering, Chemical |
| 研究领域[WOS] | Engineering |
| 关键词[WOS] | HYDROTHERMAL SYNTHESIS ; SODIUM-HYDROXIDE ; BARIUM-TITANATE ; TITANIUM SLAG ; DECOMPOSITION ; NANOPARTICLES ; TEMPERATURE ; ACTIVATION ; PIGMENT ; NA2TIO3 |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000340281900003 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/15246]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 作者单位 | 1.Chinese Acad Sci, Inst Proc Engn, Natl Engn Lab Hydromet Cleaner Prod Technol, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Meng, Fancheng,Liu, Yahui,Chu, Jinlong,et al. STRUCTURAL CONTROL OF NA(2)TIO(3) IN PRE-TREATING NATURAL RUTILE ORE BY ALKALI ROASTING FOR TIO2 PRODUCTION[J]. CANADIAN JOURNAL OF CHEMICAL ENGINEERING,2014,92(8):1346-1352. |
| APA | Meng, Fancheng,Liu, Yahui,Chu, Jinlong,Wang, Weijing,&Qi, Tao.(2014).STRUCTURAL CONTROL OF NA(2)TIO(3) IN PRE-TREATING NATURAL RUTILE ORE BY ALKALI ROASTING FOR TIO2 PRODUCTION.CANADIAN JOURNAL OF CHEMICAL ENGINEERING,92(8),1346-1352. |
| MLA | Meng, Fancheng,et al."STRUCTURAL CONTROL OF NA(2)TIO(3) IN PRE-TREATING NATURAL RUTILE ORE BY ALKALI ROASTING FOR TIO2 PRODUCTION".CANADIAN JOURNAL OF CHEMICAL ENGINEERING 92.8(2014):1346-1352. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。