A Prediction Model of Phosphorus Distribution between CaO-SiO2-MgO-FeO-Fe2O3-P2O5 Slags and Liquid Iron (Retracted article. See vol. 54, pg. 2663, 2014)
文献类型:期刊论文
作者 | Li, Peng-Cheng1,2,3; Zhang, Jian-Liang1,2 |
刊名 | ISIJ INTERNATIONAL
![]() |
出版日期 | 2014 |
卷号 | 54期号:4页码:756-765 |
关键词 | phosphorous distribution mass action concentration structural units ion and molecule coexistence theory |
ISSN号 | 0915-1559 |
通讯作者 | Li, PC (reprint author), Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 100083, Peoples R China. |
英文摘要 | CaO-SiO2-MgO-FeO-Fe2O3-P2O5 slags is typical in the basic oxygen steelmaking(BOS) process. Phosphate distribution between slags and liquid iron is an index of the phosphorus holding capacity of the slag, which determines the phosphorus content achievable in the finished steel. In this study, a thermodynamic model for calculating phosphorus distribution between CaO-SiO2-MgO-FeO-Fe2O3-P2O5 slags and liquid iron, i.e., IMCT-L-p model, has been developed coupled with a developed thermodynamic model for calculating mass action concentrations of structural units, le., IMCT-N, model, based on ion and molecule coexistence theory. Simple binary basicity R have a large effect on equilibrium mole number En; of structural units in CaO-SiO2-MgO-FeO-Fe2O3-P2O5 slags, the formula of equilibrium mole number Sigma n(i), against the simple binary basicity R of slags can be regressed as Sigma n(i) = 2.604 - 3.029*exp(-R12.339), and the fitting degree is 0.995. The comparison of the calculated phosphorous distribution by IMCT-L-p model with the measured phosphorous distribution reported from different literatures shows that the agreement between the calculated phosphorous distribution and measured phosphorous distribution is good. Meanwhile, some other L prediction models have also been taken into consideration for calculating phosphate distribution between CaO-SiO2-MgO-FeO-Fe2O3-P2O5 slags and liquid iron, and the results shows that IMCT-L-p model have more accuracy compared with other L, prediction models. The developed IMCT-L-p model can quantitatively calculate the respective contribution of FeO, CaO+FetO and MgO+FetO in the slags. A significant difference of dephosphorziation abilities among FetO, CaO+FetO and MgO+FetO can be found as approximately 0.00%, 99.98%, 0.01%. Meanwhile, the phosphorus in liquid iron can be effectively extracted by CaO+FetO in slags to form complex molecules 3CaO center dot P2O5 which made the main contribution to dephosphorizaiton in CaO-SiO2-MgO-FeO-Fe2O3-P2O8 slags. |
WOS标题词 | Science & Technology ; Technology |
学科主题 | Metallurgy & Metallurgical Engineering |
类目[WOS] | Metallurgy & Metallurgical Engineering |
研究领域[WOS] | Metallurgy & Metallurgical Engineering |
关键词[WOS] | FETO-(CAO+MGO)-(SIO2+P2O5) PHOSPHATE SLAGS ; HOT METAL ; SYSTEM ; MGO ; DEPHOSPHORIZATION ; STEEL |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000334824200007 |
源URL | [http://ir.ipe.ac.cn/handle/122111/15254] ![]() |
专题 | 过程工程研究所_研究所(批量导入) |
作者单位 | 1.Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 100083, Peoples R China 2.Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China 3.Chinese Acad Sci, State Key Lab Multiphase Complex Syst, Inst Proc Engn, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Li, Peng-Cheng,Zhang, Jian-Liang. A Prediction Model of Phosphorus Distribution between CaO-SiO2-MgO-FeO-Fe2O3-P2O5 Slags and Liquid Iron (Retracted article. See vol. 54, pg. 2663, 2014)[J]. ISIJ INTERNATIONAL,2014,54(4):756-765. |
APA | Li, Peng-Cheng,&Zhang, Jian-Liang.(2014).A Prediction Model of Phosphorus Distribution between CaO-SiO2-MgO-FeO-Fe2O3-P2O5 Slags and Liquid Iron (Retracted article. See vol. 54, pg. 2663, 2014).ISIJ INTERNATIONAL,54(4),756-765. |
MLA | Li, Peng-Cheng,et al."A Prediction Model of Phosphorus Distribution between CaO-SiO2-MgO-FeO-Fe2O3-P2O5 Slags and Liquid Iron (Retracted article. See vol. 54, pg. 2663, 2014)".ISIJ INTERNATIONAL 54.4(2014):756-765. |
入库方式: OAI收割
来源:过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。