Preparation of nano-Cu2O/TiO2 photocatalyst from waste printed circuit boards by electrokinetic process
文献类型：期刊论文
| 作者 | Xiu, Fu-Rong; Zhang, Fu-Shen |
| 刊名 | JOURNAL OF HAZARDOUS MATERIALS
 |
| 出版日期 | 2009-10-30 |
| 卷号 | 172期号:1页码:1458-1463 |
| 关键词 | Cu2O/TiO2 catalyst Waste PCBs Catalytic activity Supercritical water oxidation Electrokinetic preparation |
| 中文摘要 | It is difficult for separation and reutilization of Cu in waste printed circuit boards (PCBs) due to the heterogeneous mix of polymer materials, multiple kinds of metals and glass fiber. In this study, waste PCBs were pretreated by supercritical water oxidation (SCWO), then introduced into an electrokinetic (EK) system with nano-TiO2 suspension as catholyte. In the EK process, Cu could be leached and reduced separately from the complicated multi-metal system in cathode compartment, and Cu2O could be formed in nano-size on TiO2 surface. The properties of the composite catalysts Cu2O/TiO2 were examined and their photocatalytic efficiencies were determined for methylene blue (MB) degradation. The results indicated that the catalytic effect increased with increasing EK preparation time but decreased afterwards. The most effective catalyst (4.53 wt.% Cu2O/TiO2), whose degradation ability was found to be much higher in comparison with commercial P25, was prepared by 6 h EK treatment. It was found that the loading of Cu2O on TiO2 surface could greatly enhance the photocatalytic effect of the catalyst. It is believed that the EK technology is effective and green for direct preparation of high value-added Cu nanocomposite materials from waste PCBs or other Cu-rich wastes. (C) 2009 Elsevier B.V. All rights reserved. |
| WOS记录号 | WOS:000271980800125 |
| 源URL | [http://ir.rcees.ac.cn/handle/311016/21595]  |
| 专题 | 生态环境研究中心_环境纳米材料实验室 |
| 推荐引用方式 GB/T 7714 | Xiu, Fu-Rong,Zhang, Fu-Shen. Preparation of nano-Cu2O/TiO2 photocatalyst from waste printed circuit boards by electrokinetic process[J]. JOURNAL OF HAZARDOUS MATERIALS,2009,172(1):1458-1463. |
| APA | Xiu, Fu-Rong,&Zhang, Fu-Shen.(2009).Preparation of nano-Cu2O/TiO2 photocatalyst from waste printed circuit boards by electrokinetic process.JOURNAL OF HAZARDOUS MATERIALS,172(1),1458-1463. |
| MLA | Xiu, Fu-Rong,et al."Preparation of nano-Cu2O/TiO2 photocatalyst from waste printed circuit boards by electrokinetic process".JOURNAL OF HAZARDOUS MATERIALS 172.1(2009):1458-1463. |
入库方式： OAI收割
来源：生态环境研究中心
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。