Toughening polylactide with polyether-block-amide and thermoplastic starch acetate: Influence of starch esterification degree
文献类型：期刊论文
| 作者 | Zhou, Linyao1,2; Zhao, Guiyan1; Feng, Yulin1; Yin, Jinghua1; Jiang, Wei1 |
| 刊名 | CARBOHYDRATE POLYMERS
 |
| 出版日期 | 2015-08-20 |
| 卷号 | 127页码:79-85 |
| 关键词 | Polylactide (PLA) Impact resistant Starch acetate Esterification Biodegradable polymer blends |
| 英文摘要 | Native corn starch was esterified with acetic anhydride and plasticized with glycerol to give the thermoplastic starch acetate (TPSA). TPSA was blended with polylactide (PLA) and polyether-block-amide-graft-glycidyl methacrylate (PEBA-g-GMA) to obtain biodegradable PLA/PEBA-g-GMA/TPSA blends with high notched impact resistance and low cost. Compared with PLA/PEBA-g-GMA blends, as much as 9 wt% expensive PEBA-g-GMA elastomer could be substituted by the slightly acetylated thermoplastic starch while retaining high impact strength. The mechanical properties depended on the esterification degree of starch acetate. The impact strength, tensile strength and elongation at break increased to the peak value with increasing the esterification degree from 0 to 0.04, thereafter they decreased on further increasing the esterification degree. The morphological results showed that the TPSA particles were smaller and more uniform at the optimum esterification degree of 0.04, leading to the peak value of the mechanical properties. (C) 2015 Elsevier Ltd. All rights reserved. |
| 收录类别 | SCI |
| 语种 | 英语 |
| 公开日期 | 2015-11-02 |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/28169]  |
| 专题 | 化学研究所_高分子物理与化学实验室 |
| 作者单位 | 1.Chinese Acad Sci, Changchun Inst Appl Chem, State Key Lab Polymer Phys & Chem, Changchun 130022, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhou, Linyao,Zhao, Guiyan,Feng, Yulin,et al. Toughening polylactide with polyether-block-amide and thermoplastic starch acetate: Influence of starch esterification degree[J]. CARBOHYDRATE POLYMERS,2015,127:79-85. |
| APA | Zhou, Linyao,Zhao, Guiyan,Feng, Yulin,Yin, Jinghua,&Jiang, Wei.(2015).Toughening polylactide with polyether-block-amide and thermoplastic starch acetate: Influence of starch esterification degree.CARBOHYDRATE POLYMERS,127,79-85. |
| MLA | Zhou, Linyao,et al."Toughening polylactide with polyether-block-amide and thermoplastic starch acetate: Influence of starch esterification degree".CARBOHYDRATE POLYMERS 127(2015):79-85. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。