Direct methanol fuel cells: The effect of electrode fabrication procedure on MEAs structural properties and cell performance
文献类型：期刊论文
| 作者 | Song, SQ; Liang, ZX; Zhou, WJ; Sun, GQ; Xin, Q; Stergiopoulos, V; Tsiakaras, P |
| 刊名 | journal of power sources
 |
| 出版日期 | 2005-08-18 |
| 卷号 | 145期号:2页码:495-501 |
| 关键词 | direct methanol fuel cell MEA preparation decal transfer method |
| 英文摘要 | in the present paper, the effect of electrode preparation procedure on the structural properties of membrane electrode assembly (mea) and consequently on the performance of direct methanol fuel cells (dmfcs) was investigated. commercial ptru black anode catalyst and pt black cathode catalyst were characterized by xrd in their initial form and in their intermediate and final states after each step involved in catalyst-coated membrane electrode preparation procedure by a decal transfer method (dtm). xrd results demonstrated that the dtm process has a significant effect on the catalyst structural properties, especially on the particle size of pt black cathode catalyst. it is also discussed that among all the steps involved in the electrode fabrication procedure, catalyst ink preparation and high temperature transfer process are key factors affecting the particle size of pt black catalyst. furthermore, it was found that the maximum power density of the single dmfc using a mea fabricated by the dtm, when air is used as oxidant, is more than two times greater than that of the cell using conventionally prepared mea, and more than three times greater when pure oxygen is used as oxidant. this could be attributed to the easier mass transportation due to the thinner catalyst layer and the better contact between the catalyst layer and the electrolyte membrane in the former case, even if, according to in situ co stripping voltammetry results in the fuel cell anode environment, the surface composition of ptru anode has been changed. (c) 2005 elsevier b.v. all rights reserved. |
| WOS标题词 | science & technology ; physical sciences ; technology |
| 类目[WOS] | electrochemistry ; energy & fuels |
| 研究领域[WOS] | electrochemistry ; energy & fuels |
| 关键词[WOS] | catalysts ; platinum ; electrooxidation ; oxidation |
| 收录类别 | ISTP ; SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000231893300051 |
| 公开日期 | 2015-11-10 |
| 源URL | [http://159.226.238.44/handle/321008/139864]  |
| 专题 | 大连化学物理研究所_中国科学院大连化学物理研究所 |
| 作者单位 | 1.Chinese Acad Sci, Dalian Inst Chem Phys, State Key Lab Catalysis, Dalian 116023, Peoples R China 2.Chinese Acad Sci, Dalian Inst Chem Phys, Direct Alcohol Fuel Cell Lab, Dalian 116023, Peoples R China 3.Univ Thessaly, Sch Engn, Dept Mech & Ind Engn, Volos 38334, Greece |
| 推荐引用方式 GB/T 7714 | Song, SQ,Liang, ZX,Zhou, WJ,et al. Direct methanol fuel cells: The effect of electrode fabrication procedure on MEAs structural properties and cell performance[J]. journal of power sources,2005,145(2):495-501. |
| APA | Song, SQ.,Liang, ZX.,Zhou, WJ.,Sun, GQ.,Xin, Q.,...&Tsiakaras, P.(2005).Direct methanol fuel cells: The effect of electrode fabrication procedure on MEAs structural properties and cell performance.journal of power sources,145(2),495-501. |
| MLA | Song, SQ,et al."Direct methanol fuel cells: The effect of electrode fabrication procedure on MEAs structural properties and cell performance".journal of power sources 145.2(2005):495-501. |
入库方式： OAI收割
来源：大连化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。