中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
石英波片偏光干涉谱的研究

文献类型:期刊论文

作者冯伟伟 ; 林礼煌 ; 陈立刚
刊名光学学报
出版日期2007
卷号27期号:6页码:1044
关键词光学器件 optical device 偏光干涉量度学 polarization interferometry 石英波片 quartz wave plate 双折射率色散 birefringence dispersion 延迟量 phase retardation 厚度测量 thickness measurement
ISSN号0253-2239
其他题名Polarizated-Light Interference Spectrum of Quartz Wave Plate
中文摘要根据石英晶体双折射率的色散特性,对石英波片的偏光干涉谱进行了理论分析和数值模拟,提出了一种石英波片延迟量和厚度的偏光干涉标定法。即由偏光干涉谱,可以得出石英波片在200~2000 nm宽光谱范围内的延迟量;通过对长波段的偏光干涉谱极值波长的精确判断,可以准确地计算出该石英波片的厚度。利用Lambda 900 紫外可见近红外分光光度计对一片石英波片的偏光干涉谱进行了测量。在波长精度为0.1 nm的情况下,测量的厚度精度为0.1 μm。误差分析结果表明,通过提高光谱的最小分辨力及选择较长的光谱波段进行测量计算; According to the birefringence dispersion character of a quartz crystal, the theoretical analysis and numerical simulation about the polarization interference spectrum are given,and then a systematic way of measuring the phase retardation and thickness of the quartz wave plate, which is based on the principle of polarization interferometry, is put forward. With the polarization interference spectrum, the phase retardation of quartz wave plates can be determined at a wide spectral range from 200~2000 nm. Through accurate judgment of extreme points of the polarization interference spectrum at long-wave band, the physical thickness of the quartz wave plate can also be achieved exactly. Experimentally, the polarization interference spectrum of a quartz wave plate is measured with Lambda 900 UV/VIS/NIR spectrophotometer. Under the conditian of 0.1 nm wavelength resolution, the thickness accuracy is 0.1 μm. The result of error analysis shows that the relative error can be reduced efficiently by use of spectrometers with higher spectral resolution and longer spectral band to measure and calculate.
分类号O436
收录类别EI
语种中文
公开日期2009-09-18
源URL[http://ir.siom.ac.cn/handle/181231/1064]  
专题上海光学精密机械研究所_强场激光物理国家重点实验室
推荐引用方式
GB/T 7714
冯伟伟,林礼煌,陈立刚. 石英波片偏光干涉谱的研究[J]. 光学学报,2007,27(6):1044, 1048.
APA 冯伟伟,林礼煌,&陈立刚.(2007).石英波片偏光干涉谱的研究.光学学报,27(6),1044.
MLA 冯伟伟,et al."石英波片偏光干涉谱的研究".光学学报 27.6(2007):1044.

入库方式: OAI收割

来源:上海光学精密机械研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。