Research on the heat transfer model of platen heating surface of 300 MW circulating fluidized bed boilers
文献类型:期刊论文
作者 | Wu Haibo1,2; Zhang Man1; Sun Yunkai1; Lu Qinggang1; Na Yongjie1 |
刊名 | POWDER TECHNOLOGY
![]() |
出版日期 | 2012-08-01 |
卷号 | 226页码:83-90 |
关键词 | CFB boiler Platen heating surface Solids suspension concentration Heat transfer model |
英文摘要 | The heat transfer of the platen heating surface of circulating fluidized bed (CFB) boilers is a complex process. Because of technical protection and difficult measurement, at present there is no public calculation method which can be applied to engineering. Three 300 MW CFB boilers in actual operation in different field sites were conducted, the parameters of temperature and pressure at the side of steam and flue gas were measured respectively. Based on the tests at different loads, the effects of solids suspension concentration and average temperature parameters etc. on the heat transfer were investigated, and then the heat transfer coefficient calculation model of platen heating surface at the flue gas side was established, which takes the effects of structure and dimension of platen heating surface, furnace temperature, steam temperature, heat transfer coefficient at the steam side, emissivity of tube wall and fluidization velocity etc. into consideration. The field test data obtained from another 300 MW CFB boiler were used to verify the model. After comparing the calculated results and the values from the actual field test, it is found that the error is lower than 5%. which is within the precision permission range of engineering application. It is indicated that the calculation results using this model agree well with the experimental results on the site, confirming the reliability of this heat transfer model, which means that it can be used to calculate the heat transfer of platen heating surface of 300 MW CFB boiler and can provide reference for design, commissioning, operation of 300 MW CFB boilers. (C) 2012 Elsevier B.V. All rights reserved. |
WOS标题词 | Science & Technology ; Technology |
类目[WOS] | Engineering, Chemical |
研究领域[WOS] | Engineering |
关键词[WOS] | CFB BOILER ; FLUX ; WALL |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000306255900011 |
公开日期 | 2015-12-22 |
源URL | [http://ir.etp.ac.cn/handle/311046/101544] ![]() |
专题 | 工程热物理研究所_中国科学院工程热物理所(论文库)_期刊论文(SCI) |
作者单位 | 1.Chinese Acad Sci, Inst Engn Thermophys, Beijing 100190, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China |
推荐引用方式 GB/T 7714 | Wu Haibo,Zhang Man,Sun Yunkai,et al. Research on the heat transfer model of platen heating surface of 300 MW circulating fluidized bed boilers[J]. POWDER TECHNOLOGY,2012,226:83-90. |
APA | Wu Haibo,Zhang Man,Sun Yunkai,Lu Qinggang,&Na Yongjie.(2012).Research on the heat transfer model of platen heating surface of 300 MW circulating fluidized bed boilers.POWDER TECHNOLOGY,226,83-90. |
MLA | Wu Haibo,et al."Research on the heat transfer model of platen heating surface of 300 MW circulating fluidized bed boilers".POWDER TECHNOLOGY 226(2012):83-90. |
入库方式: OAI收割
来源:工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。