Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow
文献类型:期刊论文
作者 | Wang, Kai1,2; Li, Haiwang1; Zhu, Jianqin1 |
刊名 | APPLIED THERMAL ENGINEERING
![]() |
出版日期 | 2014-09-05 |
卷号 | 70期号:1页码:620-629 |
关键词 | Turbine cooling Impingement distance Jet position Heat transfer |
英文摘要 | An experimental investigation was carried out to examine the heat transfer characteristics on impingement cooling with extraction flow under stationary condition. The local heat transfer coefficient was measured by the transient method using TLC. Special techniques and devices were developed to make this method feasible and to produce reliable experimental data. The Reynolds number based on the inlet velocity of the jet air and the diameter of impingement hole changes from 2000 to 12,000. Various test models with relative impingement distance H/d = 1.0, 3.0, 6.0 and position of impingement cooling hole = 1/3,1/2 were conducted to get the effects of H/d and f/l. The local Nu on the target surface was measured by a transient method with TLC. Experimental results reveal that the position of impingement cooling hole f/l has great influence on the heat transfer characteristics of the target surface. The averaged Nu of f/l = 1/3 configuration is about 9% higher than that of f/l = 1/2 configuration. It is also found that the maximum local Nu is mostly affected by H/d. And the higher Nusselt number is achieved with smaller H/d, the averaged Nu of H/d = 6 model is about 22%-38% lower than that of H/d = 1 for different Reynolds numbers. (C) 2014 Elsevier Ltd. All rights reserved. |
WOS标题词 | Science & Technology ; Physical Sciences ; Technology |
类目[WOS] | Thermodynamics ; Energy & Fuels ; Engineering, Mechanical ; Mechanics |
研究领域[WOS] | Thermodynamics ; Energy & Fuels ; Engineering ; Mechanics |
关键词[WOS] | SPENT FLUID REMOVAL ; IMPINGING JETS ; TARGET SURFACE ; LEADING-EDGE ; VENT HOLES ; ARRAYS ; AIR ; PLATE ; GAS |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000341464400066 |
公开日期 | 2015-12-22 |
源URL | [http://ir.etp.ac.cn/handle/311046/105964] ![]() |
专题 | 工程热物理研究所_中国科学院工程热物理所(论文库)_期刊论文(SCI) |
作者单位 | 1.Beihang Univ, Sch Jet Prop, Natl Key Lab Sci & Technol Aeroengines, Beijing 100191, Peoples R China 2.Chinese Acad Sci, Inst Engn Thermophys, Key Lab Adv Energy & Power Chinese Acad Sci, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Wang, Kai,Li, Haiwang,Zhu, Jianqin. Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow[J]. APPLIED THERMAL ENGINEERING,2014,70(1):620-629. |
APA | Wang, Kai,Li, Haiwang,&Zhu, Jianqin.(2014).Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow.APPLIED THERMAL ENGINEERING,70(1),620-629. |
MLA | Wang, Kai,et al."Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow".APPLIED THERMAL ENGINEERING 70.1(2014):620-629. |
入库方式: OAI收割
来源:工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。