Performance analysis and improvement of a high flow coefficient centrifugal compressor
文献类型：期刊论文
| 作者 | Wang YongSheng1,2; Wang Kai1; Lin Feng1; Nie ChaoQun1; Engeda, Abraham3 |
| 刊名 | SCIENCE CHINA-TECHNOLOGICAL SCIENCES
 |
| 出版日期 | 2014-08-01 |
| 卷号 | 57期号:8页码:1647-1657 |
| 关键词 | centrifugal compressor very high flow coefficient improvement impeller trimming |
| 英文摘要 | Very high flow coefficient centrifugal compressor stages are mostly applied as the first stages of multistage compressors. The performance of this type of stages is critical to the entire centrifugal compressors, but surprisingly little related information is available in the open literature. A centrifugal compressor with high inlet flow coefficient of 0.2, presenting a narrow operating range and unstable running situation even at design speed during the test, is investigated here. To reveal flow details in this centrifugal compressor, numerical simulations have been carried out and indicate that excessive impeller flow diffusion results in the poor performance of this centrifugal compressor. With the same inlet flow coefficient, six redesign cases coming from an in-house one-dimensional analysis program are proposed together with impeller trimming and equal flow area design method for corresponding vaneless diffuser. Performance comparison among these redesign centrifugal compressors is presented and the most suitable one is recommended for test in the future. In addition, three redesign cases with lower inlet flow coefficient developed by means of flow trimming are shown in the end to satisfy potential application areas. Finally, the results in this study can provide valuable reference information for multistage centrifugal compressor design. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Engineering, Multidisciplinary ; Materials Science, Multidisciplinary |
| 研究领域[WOS] | Engineering ; Materials Science |
| 关键词[WOS] | IMPELLER ; PUMP |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000340456200021 |
| 公开日期 | 2015-12-22 |
| 源URL | [http://ir.etp.ac.cn/handle/311046/106049]  |
| 专题 | 工程热物理研究所_中国科学院工程热物理所（论文库）_期刊论文（SCI） |
| 作者单位 | 1.Chinese Acad Sci, Inst Engn Thermophys, Key Lab Adv Energy & Power, Beijing 100190, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China 3.Michigan State Univ, Dept Mech Engn, E Lansing, MI 48823 USA |
| 推荐引用方式 GB/T 7714 | Wang YongSheng,Wang Kai,Lin Feng,et al. Performance analysis and improvement of a high flow coefficient centrifugal compressor[J]. SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2014,57(8):1647-1657. |
| APA | Wang YongSheng,Wang Kai,Lin Feng,Nie ChaoQun,&Engeda, Abraham.(2014).Performance analysis and improvement of a high flow coefficient centrifugal compressor.SCIENCE CHINA-TECHNOLOGICAL SCIENCES,57(8),1647-1657. |
| MLA | Wang YongSheng,et al."Performance analysis and improvement of a high flow coefficient centrifugal compressor".SCIENCE CHINA-TECHNOLOGICAL SCIENCES 57.8(2014):1647-1657. |
入库方式： OAI收割
来源：工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。