Effect of fuel injection velocity on MILD combustion of syngas in axially-staged combustor
文献类型:期刊论文
作者 | Huang Ming-ming1,2,3; Shao Wei-wei1,2; Xiong Yan1,2; Liu Yan1,2; Zhang Zhe-dian1,2; Lei Fu-lin1,2; Xiao Yun-han1,2 |
刊名 | APPLIED THERMAL ENGINEERING
![]() |
出版日期 | 2014-05-01 |
卷号 | 66期号:1-2页码:485-492 |
关键词 | MILD combustion Staged combustor Syngas NOx/CO emissions |
英文摘要 | The role of fuel injection velocity on MILD (Moderate or Intense Low-oxygen Dilution) combustion of coal-derived syngas was examined in an axially staged combustor, where the secondary air was mixed with the flue gases from the gas generation zone to produce hot and diluted oxidant prior to its mixing with the secondary fuel. The global flame signatures, OH* radicals distribution, and exhaust emissions were obtained through experimental measurements, while the mixing behavior between the secondary fuel and oxidant was numerically studied. Higher secondary fuel injection velocity within 199-299 m/s facilitated the earlier entrainment of oxidizer into the secondary fuel and increased the flame lift-off height, resulting in a lower flame temperature, a more distributed reaction zone and reduced NOx emissions, but higher pressure loss and CO formation. The MILD regime yields lower NOx emissions compared to the traditional diffusion combustion mode, and the N2O-intermediate mechanism dominates the NO production in the syngas MILD flame with adiabatic flame temperature lower than 1565 K according to the prediction of the chemical reactor network model. (C) 2014 Elsevier Ltd. All rights reserved. |
WOS标题词 | Science & Technology ; Physical Sciences ; Technology |
类目[WOS] | Thermodynamics ; Energy & Fuels ; Engineering, Mechanical ; Mechanics |
研究领域[WOS] | Thermodynamics ; Energy & Fuels ; Engineering ; Mechanics |
关键词[WOS] | LABORATORY COMBUSTOR ; HYDROGEN ; FURNACE ; FLAMES ; FLOWS ; AIR |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000336352000049 |
公开日期 | 2015-12-22 |
源URL | [http://ir.etp.ac.cn/handle/311046/106067] ![]() |
专题 | 工程热物理研究所_中国科学院工程热物理所(论文库)_期刊论文(SCI) |
作者单位 | 1.Chinese Acad Sci, Inst Engn Thermophys, Key Lab Adv Energy & Power, Beijing 100190, Peoples R China 2.Chinese Acad Sci, Res Ctr Clean Energy & Power, Lianyungang 222069, Jiangsu, Peoples R China 3.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
推荐引用方式 GB/T 7714 | Huang Ming-ming,Shao Wei-wei,Xiong Yan,et al. Effect of fuel injection velocity on MILD combustion of syngas in axially-staged combustor[J]. APPLIED THERMAL ENGINEERING,2014,66(1-2):485-492. |
APA | Huang Ming-ming.,Shao Wei-wei.,Xiong Yan.,Liu Yan.,Zhang Zhe-dian.,...&Xiao Yun-han.(2014).Effect of fuel injection velocity on MILD combustion of syngas in axially-staged combustor.APPLIED THERMAL ENGINEERING,66(1-2),485-492. |
MLA | Huang Ming-ming,et al."Effect of fuel injection velocity on MILD combustion of syngas in axially-staged combustor".APPLIED THERMAL ENGINEERING 66.1-2(2014):485-492. |
入库方式: OAI收割
来源:工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。