Parameter study of sizing and placement of deformable trailing edge flap on blade fatigue load reduction
文献类型：期刊论文
| 作者 | Zhang, Mingming; Tan, Bin; Xu, Jianzhong |
| 刊名 | RENEWABLE ENERGY
 |
| 出版日期 | 2015-05-01 |
| 卷号 | 77页码:217-226 |
| 关键词 | Wind turbine Fatigue load Smart blade control Aero-elasticity Flow-blade interaction |
| 英文摘要 | This paper presents a numerical study on the parametric effect of deformable trailing edge flap (DTEF) on the fatigue load of a large-scale wind turbine blade. Investigations were conducted within the operation regions II and III of the turbine, respectively. Results showed that, compared with the original collective pitch method, the control effectively reduced the fatigue load on blade and drive-chain components, and positively affected the generator power and pitch system as well. Furthermore, the performances were gradually improved with increasing DTEF spanwise location from the rotor center, spanwise and central chordwise length, and deflection angle range, except for the worse performance with increasing spanwise location to the blade tip within region II. It was found that the smart control altered the nature of the flow-blade interactions and changed the in-phased fluid-structure synchronization into anti-phased interaction at main load frequencies, thus significantly enhancing the damping of fluid-structure system and contributing to greatly attenuated fatigue load on both rotor and drive-chain components. These phenomena happened for all primary load frequencies within region III, due to less flow detachment under the effect of the pitching function, determining its superiority over region II in terms of the control performance. (C) 2014 Elsevier Ltd. All rights reserved. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Energy & Fuels |
| 研究领域[WOS] | Energy & Fuels |
| 关键词[WOS] | MODEL-PREDICTIVE CONTROL ; SMART ROTOR CONTROL ; WIND TURBINE BLADE ; PITCH CONTROL |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000349504800023 |
| 公开日期 | 2015-12-22 |
| 源URL | [http://ir.etp.ac.cn/handle/311046/106077]  |
| 专题 | 工程热物理研究所_中国科学院工程热物理所（论文库）_期刊论文（SCI） |
| 作者单位 | Chinese Acad Sci, Inst Engn Thermophys, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Mingming,Tan, Bin,Xu, Jianzhong. Parameter study of sizing and placement of deformable trailing edge flap on blade fatigue load reduction[J]. RENEWABLE ENERGY,2015,77:217-226. |
| APA | Zhang, Mingming,Tan, Bin,&Xu, Jianzhong.(2015).Parameter study of sizing and placement of deformable trailing edge flap on blade fatigue load reduction.RENEWABLE ENERGY,77,217-226. |
| MLA | Zhang, Mingming,et al."Parameter study of sizing and placement of deformable trailing edge flap on blade fatigue load reduction".RENEWABLE ENERGY 77(2015):217-226. |
入库方式： OAI收割
来源：工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。