Workpiece angle measurement based on Hough transform
文献类型：会议论文
| 作者 | Fuzhong Bai, Changhui Rao, Zhen Liu |
| 出版日期 | 2008 |
| 会议名称 | Proc. of SPIE |
| 卷号 | 7130 |
| 页码 | 71303W-1 |
| 中文摘要 | To overcome the difficulty in the non-contact angle measurement especially for large-scaled workpieces, the paper presents a new angle measurement method based on Hough transform. The realization process of the method consists of workpiece image acquisition & preprocessing and angle measurement. With the preprocessing one can obtain an ideal binarized edge image of the workpiece image. The angle measurement is then carried out by employing the classical Hough transform. Except the discussion of measurement principle, both practical examples and simulated experiments are introduced to demonstrate the performance of the method proposed in the paper. The experiment results indicate that this method can be applied to measure the workpiece angle under many occasions and can achieve the aim of the noncontact angle measurement. At the same time, it does still possess great advantages in terms of reliability and noise rejection capability. |
| 收录类别 | 其他 |
| 学科主题 | 自适应光学技术 |
| 语种 | 英语 |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/1849]  |
| 专题 | 光电技术研究所_自适应光学技术研究室（八室） |
| 推荐引用方式 GB/T 7714 | Fuzhong Bai, Changhui Rao, Zhen Liu. Workpiece angle measurement based on Hough transform[C]. 见:Proc. of SPIE. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。