中国科学院机构知识库网格系统: 检索

The Micro-pits Image Design Method with Direction-uniformity Distribution Based on Minimum Interval Area Scrambling 会议论文 OAI收割
3rd International Conference on Mechatronics and Intelligent Materials (MIM 2013), XiShuangBanNa, PEOPLES R CHINA, May 18-19, 2013
作者: Wang HC(王红才); Wang Y(王扬)

收藏 | 浏览/下载：25/0 | 提交时间：2013/09/30

Surface roughness evaluation Image design method Uniformity

The electromagnetic compatibility design of restrained image transmission equipments (EI CONFERENCE) 会议论文 OAI收割
2011 3rd International Conference on Mechanical and Electronics Engineering, ICMEE 2011, September 23, 2011 - September 25, 2011, Hefei, China
作者: Wang W.; Wang W.

收藏 | 浏览/下载：35/0 | 提交时间：2013/03/25

In order to improve the quality of image transmission this paper puts forward a box shielding method that could eliminate electromagnetic interference signal on image transmission equipments. At first this paper analyzes the shielding effectiveness of electromagnetic interference selects the qualified shielding material and designs the structure. After that it analyzes the descending of shielding effectiveness in the operational system and improves the equipments shielding effectiveness by means of the electromagnetic compatibility design that accords with electromagnetic compatibility norms. At last through the EMI radiometry this paper confirms that the equipments are in accordance with the design requirements of electromagnetic compatibility norms. (2012) Trans Tech Publications Switzerland.

Space optical remote sensor of the CAE thermal control index calculation method (EI CONFERENCE) 会议论文 OAI收割
2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, September 16, 2011 - September 18, 2011, Guangzhou, China
作者: Li L.

收藏 | 浏览/下载：33/0 | 提交时间：2013/03/25

The thermal control indicators CAE methods of Space optical remote sensor are analyzed in the presented work. We sat up a thermal optical analysis model for space optical remote sensor. By assuming fully covered by in-orbit temperature load and using the finite element method for thermal deformation analysis we obtained the optical remote sensor surface deformation and displacement under various thermal loading. Using ZERNIKE polynomial wave was fitted to obtain ZERNIKE polynomial coefficients which were incorporated into the optical system design. Using CODE V optical calculation software heat-ray machines under elastic deformation of the system point spread function transfer function (MTF) wave front differential (WFE) etc. were calculated. Image quality changes of remote sensors are discussed in variety assumed cases such as temperature loads of quality change. By repeated iteration critical value of temperature fields meeting the design requirements are obtained for the optical system. Optical indicators were converged to the temperature field indicator then reasonable indicators of thermal control for remote sensors were obtained. For the thermal control design this method provided a reliable basis for design. (2011) Trans Tech Publications Switzerland.

The research on statistical properties of TDI-CCD imaging noise (EI CONFERENCE) 会议论文 OAI收割
International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Imaging Detectors and Applications, May 24, 2011 - May 26, 2011, Beijing, China
Gu Y.-Y.; Shen X.-H.; He G.-X.

收藏 | 浏览/下载：31/0 | 提交时间：2013/03/25

TDI-CCD can improve the sensitivity of space camera without any degradation of spatial resolution which is widely used in aerospace imaging devices. The article describes the basic working principle and application characteristics of TDI-CCD devices analyses the composition of TDI-CCD imaging noise and propose a new method to analyze TDI-CCD imaging noise with statistical probability distribution. In order to estimate the distribution of gray values affect by noise we introduced the concept of skewness and kurtosis. We design an experiment using constant illumination light source take image with TDI-CCD working at different stage such as stage 16 stage 32 stage 48 stage 64 and stage 96 analyse the characteristics of image noise with the method we proposed experimental results show that the gray values approximately meet normal distribution in large sample cases. 2011 SPIE.

Evaluation of the operating range for ground-based infrared imaging tracking system (EI CONFERENCE) 会议论文 OAI收割
International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, May 24, 2011 - May 24, 2011, Beijing, China
作者: Zhang Z.-D.

收藏 | 浏览/下载：50/0 | 提交时间：2013/03/25

Ground-based infrared imaging tracking system (GIITS) is of great importance for aerial target warning and guard. The operating range is one of the key performance specifications on the other which should be calculated calculate the radiation power received on the detector in order to analysis whether the output signal meets the detection requirements or not analyzed and studied during the whole GIITS design process. The operating range is mostly influenced by a few factors without considering the effect of the background radiation. By improving of the traditional method including atmospheric attenuation a new operating range calculation model of the GIITS was established based on two requirements. One is that the image size of observed target should meet the requirement of the processor signal extraction. The number of the pixel occupied by target image should be more than 9. The other is that the signal noise ratio (SNR) of the GIITS should not be less than 5 to meet the requirements of the target detection probability and spatial frequency. The SNR calculation equation in form of energy is deduced and the radiation characteristic of the observed target and background are analyzed. When evaluate the operating range of the GIITS using the new method the performance of GIITS and feature of target and background. This paper firstly makes analysis and summarization on the definite localizations of the traditional operating range equation of the GIITS. The localizations are mainly in two aspects. On one hand we should successively calculate two operating range values according to two requirements mentioned above and choose the minimum value as the analytic result. In the end the dispersion of the image and the effect of image dispersion are not considered in the traditional method an evaluation of operating range for fighter aircraft is accomplished as an example. The influence factors in every aspect on operating range were explored by the calculated result. The new operating range calculation model provides the theoretical basis for the design and applications as well as the comprehensive evaluation of a GIITS. 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Research on image restoration of Roll-Swing imaging seeker (EI CONFERENCE) 会议论文 OAI收割
3rd IEEE International Conference on Advanced Computer Control, ICACC 2011, January 18, 2011 - January 20, 2011, Harbin, China
作者: Zhang H.; Zhang H.

收藏 | 浏览/下载：34/0 | 提交时间：2013/03/25

To achieve a correct image receiving for Roll-Swing imaging seeker the mechanism and imaging process is analyzed. The causes of image rotation are discussed. The influence of the frame encoders' precision on imaging de-rotation quality is analyzed. The Roll-Swing imaging seeker is designed for high-speed aerocraft thus the received images are greatly degraded due to atmospheric turbulence. A new method of image restoration is proposed for turbulence-degraded images in this paper. The method is to get point spread function (PSF) based on the estimation of optical transfer function (OTF) according to the optical system design simulation. Finally to obtain the restored image constrained least squares filtering is used with the known PSF. The experiment results indicate that the new restoration method has a favorable effect to satisfy requirement of the automatic target recognition. 2011 IEEE.

High precision test method for dynamic imaging of space camera (EI CONFERENCE) 会议论文 OAI收割
2010 IEEE International Conference on Advanced Computer Control, ICACC 2010, March 27, 2010 - March 29, 2010, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States
作者: Jin L.-X.; Zhang K.; Zhang K.; Zhang K.; Zhang K.

收藏 | 浏览/下载：36/0 | 提交时间：2013/03/25

A test method for dynamic imaging of space TDICCD (Time Delay and Integration Charge Coupled Devices) camera was presented in this paper. The test method adopted the PLL (Phase Locked Loop) technology and CMAC (Cerebella Model Articulation Controller) friction compensation as control strategy. Furthermore According to this method a test system for dynamic imaging of space TDICCD camera was designed and implemented. The system simulated the movement of the ground objects relative to the space aerocraft to validate the capability of image speed match and the dynamic imaging quality of TDICCD camera. The design adopted a precision turntable and a drift turntable to simulate the movement around the earth and the drift motion in different latitude due to the rotation of earth of the aerocraft. The turntables were drived by permanent magnet torque motor which was powered by PWM (Pulse Width Modulation). The system adopted DSP (Digital Signal Processor) as the control core and reached a very high performance. The experimental results showed that the steady speed error was better than 0.01 % and the instantaneous speed error reached 0.0267%. The precision of the test system designed met the requirement for dynamic imaging of TDICCD camera. 2010 IEEE.

Far-field focusing of laser beam based on digital image processing techniques (EI CONFERENCE) 会议论文 OAI收割
Optoelectronic Imaging and Multimedia Technology, October 18, 2010 - October 20, 2010, Beijing, China
作者: Zhao S.; Tian Y.-Z.; Liu L.-S.; Guo J.; Zhang H.-Y.

收藏 | 浏览/下载：28/0 | 提交时间：2013/03/25

In order to lead the laser beam transmit in the atmosphere convergently an experiment of laser focus at the distance of 450m and 300m has been operated in the outdoor place. The actual manipulations are as follows: Firstly the laser was collimated by a beam expander then the near-parallel laser beam was transmitted with a Galileo telescope system and the distance between the concave lens and the convex lens can be tuned through a precise displacement platform so the focus of the system changed due to the tiny displacement of the concave lens. Secondly the average power of the laser spot can be measured using power meter the power is 47.67mW and the standard deviation is 0.67mW while the focal length is 450m. Thirdly the energy distribution was found through the laser beam analyzer. The spot images were saved using the beam analyzer then the saved image can be processed with Matlab software afterwards. The function named EDGE and Sobel operator was used in the pre-processing of the saved image then method of median filter was used in the course of image de-noising and 53H filter was adopted in the signal analysis. The diameter of laser spot was obtained by the method above the diameter is 5.56mm and the standard deviation is 0.24mm. The spot center excursion is 0.56mm it is 10.43% of the total diameter of the laser spot. At last the key factors of the energy dissipation in the focusing system can be summarized as follows: restriction of the diffraction limit attenuation in the atmosphere geometrical aberration of optical system and the diffraction limit and the geometrical aberration are significant in the three factors above so we can reduce the impact of the both factors during the design of optical system. The reliable referenced data of the system design can be acquired through the primary experiment research. 2010 SPIE.

A digital image processing system based on DSP (EI CONFERENCE) 会议论文 OAI收割
2nd International Conference on Information Engineering and Computer Science, ICIECS 2010, December 25, 2010 - December 26, 2010, Wuhan, China
作者: Liu Y.; He X.; Liu Y.; Liu Y.

收藏 | 浏览/下载：14/0 | 提交时间：2013/03/25

In order to detect the target position real-timely a real time target detecting system based on tms320F2812 DSP and Spartan3-SC3S400 FPGA is designed. The design hardware structure a target detecting method and software char flow of FPGA and DSP are presented. The system is tested by a 1Kx1K image the processing time is 1.3ms experiments results show that the method is feasible the simple design and stable correct results make this method very ascendant in practical application. 2010 IEEE.

Driving and image enhancement for CCD sensing image system (EI CONFERENCE) 会议论文 OAI收割
2010 3rd IEEE International Conference on Computer Science and Information Technology, ICCSIT 2010, July 9, 2010 - July 11, 2010, Chengdu, China
Zhang M.; Ren J.

收藏 | 浏览/下载：37/0 | 提交时间：2013/03/25

The paper designs a driving circuit of high sensitive wide dynamic for CCD sensing imaging system which adopts a Dalsa-made high resolution full-frame 33-mega pixels area CCD FTF5066M. Field Programmable Gate Array (FPGA) is used as the main device to accomplish the timing design of the circuits and power driver control of the sensor. By using the Correlated Double Sampling (CDS) technique the video noise is reduced and the SNR of the system is increased. The output rate of the imaging system designed with integrated chip can reach to 1.3 frames per second through bi-channel output. We use the histogram specification to adjust the brightness of the captured image. And then use the median filtering to suppress the noise. The traditional gray mean gradient (GMG) and the objective evaluation method based on Human Visual System (HVS) used to verify the effect of image enhancement. 2010 IEEE.