中国科学院机构知识库网格系统: 检索

Tribological properties of Mos2 thin coatings under liquid lubricating (EI CONFERENCE) 会议论文 OAI收割
2nd International Conference on Innovation Manufacturing and Engineering Management, IMEM 2012, December 14, 2012 - December 16, 2012, Chongqing, China
Bai Y.; Cao P.

收藏 | 浏览/下载：33/0 | 提交时间：2013/03/25

The objective of this study is to investigate the effect of solid and liquid lubrication on friction and wear performance of selected solid lubricating coatings comparative experiments have been carried out on magnetron sputtered MoS2 coatings against Si3N4 ball using a ball-on-disk tribo-tester under the conditions of room temperature and different lubrication. Surface morphology of coatings were investigated by atom force microscope (AFM) and friction coefficient (COF) and wear rate of solid films were also be analyzed. It was shown that the friction is greatly reduced when the solid film is lubricated with oil and grease simultaneously in comparison with single-lubricant lubrication at the start-up or under boundary lubrication conditions. Liquid lubrication causes a dramatic decrease of the wear-ability of the MoS2 coatings. The effect of oil lubrication to the deterioration of wear resistance of MoS2 film was even worse than lubrication grease. (2013) Trans Tech Publications Switzerland.

Characteristic point match algorithm based on the SURF in binocular stereo vision (EI CONFERENCE) 会议论文 OAI收割
5th International Conference on Intelligent Networks and Intelligent Systems, ICINIS 2012, November 1, 2012 - November 3, 2012, Tianjin, China
作者: Wang L.; Wang L.; Wang L.; Yang L.; Yang L.

收藏 | 浏览/下载：27/0 | 提交时间：2013/03/25

One of the main components of the computer vision is 3D reconstruction. Extracts and the match based on two-dimensional picture characteristic point is the 3D reconstruction technology core. Taking binocular stereoscopic vision theory as a foundation through extracts the characteristics of SURF based on the multi-scale analysis this feature has specific scale reproducibility put the epipolar constraints and disparity constraints as conditions judgement to specific screening it is greatly reduced the search range. The experiment use the matching method for three different actual scenes the results shows that the method can enhance the image matching speed and precision and can get more precise dense parallax used for reconstruction complete scene. 2012 IEEE.

An auto-focus algorithm of fast search based on combining rough and fine adjustment (EI CONFERENCE) 会议论文 OAI收割
3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012, March 27, 2012 - March 29, 2012, Xiamen, China
作者: Zhang S.; Zhang Y.

收藏 | 浏览/下载：25/0 | 提交时间：2013/03/25

A coarse and fine combined fast search and auto-focusing algorithm was suggested in this paper. This method can automatically search and find the focal plane by evaluating the image definition. The Krisch operator based edge energy function was used as the big-step coarse focusing and then the wavelet transform based image definition evaluation function which is sensitivity to the variation in image definition was used to realize the small-step fine focusing in a narrow range. The un-uniform sampling function of the focusing area selection used in this method greatly reduces the workload and the required time for the data processing. The experimental results indicate that this algorithm can satisfy the requirement of the optical measure equipment for the image focusing. (2012) Trans Tech Publications.

Aerothermal optimization of hypersonic vehicle leading edge based on genetic algorithm 会议论文 OAI收割
23rd International Congress of Theoretical and Applied Mechanics, 中国北京/Beijing, China, 2012-08-19
作者: Cui K(崔凯); Hu SC(胡守超); Gao TY(高太元); Wang XP(王秀平); Yang GW(杨国伟)

收藏 | 浏览/下载：14/0 | 提交时间：2014/04/02

vehicle leading 0algorithm genetic hypersonic optimization aerothermal based method design attack novel around angle evaluated greatly about fluid result differ

An accuracy requirement analysis for LED brightness and color correction system (EI CONFERENCE) 会议论文 OAI收割
2011 International Conference on Transportation, Mechanical, and Electrical Engineering, TMEE 2011, December 16, 2011 - December 18, 2011, Changchun, China
作者: Wang R.

收藏 | 浏览/下载：63/0 | 提交时间：2013/03/25

Brightness and color correction system is working for the color uniform problem of LED display. The correction system can improve LED display's quality greatly. The accuracy of the LED system must consider the accuracy requirements of the color correction system. This paper analyze the accuracy requirements from two aspects. One is that the accuracy requirements should consider the chromatic tolerance for the human eyes the other one is that the accuracy requirements should be associated with the precision of measuring equipment. This paper discuss the accuracy requirement with the CIE1976LUV as a color space to meet the chromatic tolerance of the human eyes and also give an explanation on how the accuracy of the measuring equipment affect the the correction system. Then this paper give a method to ensure the accuracy requirement for the correction system of a LED display. 2011 IEEE.

Stabilization and tracking precision improved based on disturbance observer (EI CONFERENCE) 会议论文 OAI收割
2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011, July 15, 2011 - July 17, 2011, Inner Mongolia, China
Sun G.; Zhu M.; Jia H.

收藏 | 浏览/下载：31/0 | 提交时间：2013/03/25

Based on the kinematics of semi-strapdown seeker the framework coordinate of the semi-strapdown seeker is established and the optical axis stabilization equation of semistrapdown seeker is deduced based on product of exponential (POE) formula. The stabilization control principle block diagram of semi-strapdown seeker is shown based on the stabilization equation. The main influence factors of the stability precision are pointed out such as friction disturbance velocity measurement noise and missile disturbance. For the sake of improving the stabilization precision and tracking precision disturbance observer was proposed in the inner loop of semi-strapdown seeker servo-control system. The low frequency external disturbance and high frequency velocity measurement noise are effectively restrained by the disturbance observer as shown in hardware-in-loop simulation and optical axis stabilization precision and tracking precision are greatly improved. 2011 IEEE.

Geocentric distance's errors' correction of space cameras based on USGS DEM (EI CONFERENCE) 会议论文 OAI收割
2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, May 27, 2011 - May 29, 2011, Xi'an, China
作者: Li W.; Li W.; Xu S.

收藏 | 浏览/下载：25/0 | 提交时间：2013/03/25

In order to correct the geocentric distance's error of TDI (Time Delay and Integration) CCD space camera in calculation of image motion compensation the data source of the earth's height above sea level USGS DEM (United States Geological Survey Digital Elevation Model) has been introduced to make digital elevation map the match error of the forward direction (the integral direction of TDI CCD) has been greatly decreased by correcting the geocentric distance error and eliminate the influence to the relative error of image motion velocity and correct the error generated by the different heights above sea level. After correcting which greatly improves the imaging quality of TDI CCD space camera. 2011 IEEE. a model of image motion calculation of nadir has been introduced the calculation and analysis of the model shows that: the maximum error of image motion velocity about 1.72% has been decreased to 0.06% and the influence of the geocentric distance error to the relative error of image motion velocity has been analyzed with the model

The optical design of cubic phase plate testing system (EI CONFERENCE) 会议论文 OAI收割
2011 Symposium on Photonics and Optoelectronics, SOPO 2011, May 16, 2011 - May 18, 2011, Wuhan, China
作者: Zhang X.; Zhang X.; Zhang X.; Zhang Y.

收藏 | 浏览/下载：19/0 | 提交时间：2013/03/25

Computer-generated holograms (CGH) have been widely used for years in optical testing of aspheric surfaces in combination with Fizeau interferometers. With the development of diffraction optics computer technology and micro-processing technology the accuracy of the CGH testing can achieve a hundredth of a wave and the cost is reduced greatly. CGH is capable of producing an optical wavefront with any desired shape. So it is fascinating and will have good prospects to test free-form surfaces using CGH. As the CGH can create any wavefront shape it can also be used in unsymmetrical aspherical surfaces testing. Taking the cubic surface as an example this paper gives a method to test unsymmetrical surfaces. This paper gives the design to test a cubic surface. And the separation of the diffraction orders and the binary process of the continuous CGH phase function are discussed in detail. The alignment tolerance of the test system and the CGH fabrication tolerance are analyzed. We also present an idea using a CGH and two spherical lenses as null lens to test the cubic surface when the surface deviation is great. 2011 IEEE.

Astronomical image restoration through atmosphere turbulence by lucky imaging (EI CONFERENCE) 会议论文 OAI收割
3rd International Conference on Digital Image Processing, ICDIP 2011, April 15, 2011 - April 17, 2011, Chengdu, China
作者: Zhao J.; Wang J.; Zhang S.

收藏 | 浏览/下载：27/0 | 提交时间：2013/03/25

In this paper we develop a lucky imaging system to restore astronomical images through atmosphere turbulence. Our system takes very short exposures on the order of the atmospheric coherence time. The rapidly changing turbulence leads to a very variable point spread function (PSF) and the variability of the PSF leads to some frames having better quality than the rest. Only the best frames are selected aligned and co-added to give a final image with much improved angular resolution. Our system mainly consists of five parts: preprocessing frame selection image registration image reconstruction and image enhancement. Our lucky imaging system has been successfully applied to restore the astronomical images taken by a 1.23m telescope. We have got clear images of moon surface and Jupiter and our system can be demonstrated to greatly improve the imaging resolution through atmospheric turbulence. 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Research on image restoration of Roll-Swing imaging seeker (EI CONFERENCE) 会议论文 OAI收割
3rd IEEE International Conference on Advanced Computer Control, ICACC 2011, January 18, 2011 - January 20, 2011, Harbin, China
作者: Zhang H.; Zhang H.

收藏 | 浏览/下载：28/0 | 提交时间：2013/03/25

To achieve a correct image receiving for Roll-Swing imaging seeker the mechanism and imaging process is analyzed. The causes of image rotation are discussed. The influence of the frame encoders' precision on imaging de-rotation quality is analyzed. The Roll-Swing imaging seeker is designed for high-speed aerocraft thus the received images are greatly degraded due to atmospheric turbulence. A new method of image restoration is proposed for turbulence-degraded images in this paper. The method is to get point spread function (PSF) based on the estimation of optical transfer function (OTF) according to the optical system design simulation. Finally to obtain the restored image constrained least squares filtering is used with the known PSF. The experiment results indicate that the new restoration method has a favorable effect to satisfy requirement of the automatic target recognition. 2011 IEEE.