中国科学院机构知识库网格系统: 检索

浏览/检索结果: 共6条，第1-6条

帮助

条数/页：排序方式：
	Research on active polarization imaging experiments and key technologies in smoke and dust environment 期刊论文 OAI收割 Optik, 2019, 卷号: 198 作者: Xie, Meilin; Liu, Peng; Ma, Caiwen; Hao, Wei; Huang, Wei \| 收藏 \| 浏览/下载：148/0 \| 提交时间：2019/09/25 Polarization imaging Smoke environment Laser illumination Range application Image quality
	Study on the azimuth bearing scheme of a large Alt-azimuth telescope (EI CONFERENCE) 会议论文 OAI收割 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, April 26, 2010 - April 29, 2010, Dalian, China 作者: Wang H.; Dai S.; Zhang J.; Wang H.; Zhang J. 收藏 \| 浏览/下载：30/0 \| 提交时间：2013/03/25 The azimuth bearing schemes in typical large Alt-azimuth telescopes especially the 3.5-m APO telescope and the 4.1-m SOAR telescope were analyzed. A scheme of high-angular contacted thrust ball bearing integrated with a radial ball bearing was put forward. According to the Hertz contact theory the corresponding parameters were designed for engineering application. The static performance parameters within the range of 60 85 original contact angle were calculated. Compared with the traditional plane thrust ball bearing the results shows that the high-angular (80) contact thrust ball bearing has more benefits at bearing strength and rigidity for large telescope. The 1500mm diameter prototyping bearing shows good performance including the axial jitter is 0.009mm the radial jitter is 0.006mm the maximum starting torque without load is 30N·m and the load capacity is more than 30t which offers advanced technique path for the buildup of the high precision azimuth shafting and the whole telescope system. 2010 Copyright SPIE - The International Society for Optical Engineering.
	Study on sensing properties of a temperature-independent high pressure sensor base on tapered FBG (EI CONFERENCE) 会议论文 OAI收割 International Symposium on Photonics and Optoelectronics, SOPO 2010, June 19, 2010 - June 21, 2010, Chengdu, China 作者: Liu Y.; Zhang Y.; Zhang X.; Zhang X.; Zhang X. 收藏 \| 浏览/下载：20/0 \| 提交时间：2013/03/25 The sensing properties with strain and temperature of tapered FBG had been researched both theoretically and experimentally. Based on tapered FBG and thin-wall strain cylinder structure a novel temperature-independent high pressure sensor was fabricated and investigated. The tapered FBG performed as a chirped grating whose bandwidth and reflection power broadened and increased when the pressure applied on it. Moreover the bandwidth and the reflection power were temperature-independent. So the value of the strain can be obtained by detecting the reflection power. This method effectively solved the cross-sensitivity problem. The experiment results indicated that this sensor provided a measurement range of 040MPa with a sensitivity of 0.04w/MPa low cost and good application prospect. 2010 IEEE.
	Phase-laser ranging system based on digital signal processing for optoelectronics theodolite application (EI CONFERENCE) 会议论文 OAI收割 2010 3rd International Conference on Advanced Computer Theory and Engineering, ICACTE 2010, August 20, 2010 - August 22, 2010, Chengdu, China 作者: Liu Y.-S. 收藏 \| 浏览/下载：34/0 \| 提交时间：2013/03/25 In order to meet requirement of high accurate ranging the laser ranging system is designed for optoelectronics theodolite application by this paper based on digital signal processing. Variable modulating method is used to solve the antinomy between the measuring range and accuracy. Frequency mixing is adopted to reduce the frequency of the signal which can lower the requirement for hardware. The high ranging accuracy is achieved by way of Fast Fourior Transform (FFT) using digital signal processor and error correcting factor. Experiment results indicate that using digital signal processing method can reduce the influence of surroundings and hardware system and obtain high ranging accuracy. 2010 IEEE.
	Configuring an electrostatic membrane reflector with potentials exerted on distributed electrodes (EI CONFERENCE) 会议论文 OAI收割 2009 IEEE International Conference on Mechatronics and Automation, ICMA 2009, August 9, 2009 - August 12, 2009, Changchun, China 作者: Zhang P.; Shi G. 收藏 \| 浏览/下载：13/0 \| 提交时间：2013/03/25 Electrostatic membrane reflector (EMR) is very promised for optical quality application with the merits of utra-lightweight and flexible. Configuring a circular membrane reflector with electrostatic potentials exerted on distributed electrodes can approximatively produce a parabolic shape. A 300mm EMR (made from polyimide) stretched by distributed electrodes below is designed and the number of concentric electrodes needed for membrane shape forming is analysed. First based on an analytical solution of Poisson's equation determine the membrane control matrix by finding influence functions of 3 concentric electrodes and 6 control points on membrane surface in order to compute the needed voltages exerted on the distributed electrodes by the method of least-squares fitting. Then the final shape solved by finite element analysis with ANSYS is contrasted with the paraboloid and deviates greatly when the central displacement of membrane is beyond 2.5mm but in this range increasing the number of electrodes and control points will get a better shape. The corresponding errors are analyzed and the control method is concluded. Only using the integrated method of analytical computation numerical analysis and experiment the membrane shape of certain central displacement can be exactly predicted and controlled. 2009 IEEE.
	Research on 10.6 m laser beam monitoring in CO2 laser processing system (EI CONFERENCE) 会议论文 OAI收割 Infrared Materials, Devices, and Applications, November 12, 2007 - November 15, 2007, Beijing, China 作者: Gao Y.; Shao S. 收藏 \| 浏览/下载：19/0 \| 提交时间：2013/03/25 It is a key point of CO2 laser beam monitoring in the CO 2 laser processing system to achieve alignment between CO2 laser and PL (pointing and launching) system. By monitoring the angle offset of CO2 laser beam the compensation can be gotten witch is given to fast-steering mirror to rectify the direction of laser beam. But the normal photoelectric detector can not get the laser signal because of CO2 laser's high energy and long wavelength. Its wavelength is 10.6m and its power can reach kW level. Consequently it is difficult to detect the high-energy 10.6m laser beam directly. So we monitored the output mirror of laser resonator superseded the laser beam indirectly. The laser beam monitoring system could be designed based on CCD laser auto-collimation angular measurement principle and image processing method. In this paper application of CCD laser auto-collimation angular measurement principle and image processing method for CO2 laser beam monitoring system is introduced particularly After design fabrication and alignment the monitoring system can be used for experimental study that including angular measurement accuracy and angle offset measurement of CO2 laser beam. Angle offset range and angle variation rule of CO2 laser beam is also can be acquired for further research.