Modeling and optimizing industrial inkjet printhead for printable electronics fabrication
文献类型：会议论文
| 作者 | Ma LB(马连博) ; He MW(何茂伟); Hu KY(胡琨元); Zhu YL(朱云龙)
|
| 出版日期 | 2014 |
| 会议名称 | 5th International Conference on Flexible and Printed Electronics (ICFPE) |
| 会议日期 | October 21-23, 2014 |
| 会议地点 | Beijing |
| 关键词 | Inkjet Printhead Lumped Element Modeling Optimization Algorithm Printable Electronics Fabrication |
| 页码 | 15-19 |
| 中文摘要 | The most significant issues in printable electronics fabrication are the printing quality and efficiency delivered by drop-on-demand (DOD) industrial inkjet printhead. Aiming to characterize the nonlinear behaviors of piezoelectric inkjet printhead, the dynamic lumped element model (DLEM) is proposed to cast the original LEM into a time-varying and nonlinear fashion. At the same time , the PSO-based optimization for paramenters is incorporated in DLEM. Due to new characteristics, DLEM can accurately simulate the inkjet-printed nanosilver droplet formation process and effectively predicate optimal combinations of high-frequency driving waveform with high printing quality. From extensive experimental studies, the effectiveness and efficiency of the proposed DLEM is validated. |
| 产权排序 | 1 |
| 会议录 | Applied Mechanics and Materials
 |
| 会议录出版者 | Trans Tech Publications |
| 会议录出版地 | Zurich-Durnten, Switzerland |
| 语种 | 英语 |
| ISSN号 | 1660-9336 |
| ISBN号 | 978-3-03835-436-9 |
| 源URL | [http://ir.sia.ac.cn/handle/173321/17330]  |
| 专题 | 沈阳自动化研究所_信息服务与智能控制技术研究室 |
| 推荐引用方式 GB/T 7714 | Ma LB,He MW,Hu KY,et al. Modeling and optimizing industrial inkjet printhead for printable electronics fabrication[C]. 见:5th International Conference on Flexible and Printed Electronics (ICFPE). Beijing. October 21-23, 2014. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。