平头铣刀圆形铣削的切削力预测
文献类型：期刊论文
| 作者 | 曲胜 ; 赵吉宾; 田凤杰; 齐根想
|
| 刊名 | 机械设计与制造
 |
| 出版日期 | 2015 |
| 期号 | 12页码:48-50, 54 |
| 关键词 | 圆形铣削 平头铣刀 切削力 瞬时切削厚度 |
| ISSN号 | 1001-3997 |
| 其他题名 | Cutting Force Prediction in Circular Milling Process for Flat End Mill |
| 产权排序 | 1 |
| 中文摘要 | 针对平头铣刀的圆形铣削,提出一种适用于圆形铣削的切削力预测方法。建立铣刀与工件交点的数学模型,求解工件与铣刀的时变交点进而计算铣削过程中不断变化的切入角与切出角。同时分析了铣刀轨迹曲率效应对瞬时切削厚度的影响。通过槽铣试验来确定切削力系数。基于微分思想,将圆形铣削过程中的瞬时切削厚度运用到切削力模型中计算微元切削力,然后通过积分法获得切削力值。数值仿真与圆形铣削试验结果表明,预测的铣削力和试验结果在幅值和变化趋势上都吻合良好,从而验证了该切削力预测方法的有效性。 |
| 英文摘要 | An approach of cutting force prediction in circular milling for flat end mill is presented in this paper. To this end， the mathematical model of tool and workpiece intersection is established. By predicting the time varying cutter -part intersection as the cutter travels along the circular path，the changing entry and exit angles are analyzed. Meanwhile，the curvature effects of tool path on instantaneous chip thickness is analyzed. The cutting force coefficients are identified by slot milling. Based on the idea of differential，the acquired instantaneous chip thickness is utilized to calculate the cutting force of every unit according to the cutting force model. And then，the cutting force is achieved by means of integration. The results of simulation and milling experiment show that the predicted cutting force is according with the measurement both in magnitude and in variation trend. Thus，the validity of the proposed approach is confirmed. |
| 语种 | 中文 |
| 公开日期 | 2016-02-26 |
| 源URL | [http://ir.sia.cn/handle/173321/17623]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 沈阳自动化研究所_海洋信息技术装备中心 |
| 推荐引用方式 GB/T 7714 | 曲胜,赵吉宾,田凤杰,等. 平头铣刀圆形铣削的切削力预测[J]. 机械设计与制造,2015(12):48-50, 54. |
| APA | 曲胜,赵吉宾,田凤杰,&齐根想.(2015).平头铣刀圆形铣削的切削力预测.机械设计与制造(12),48-50, 54. |
| MLA | 曲胜,et al."平头铣刀圆形铣削的切削力预测".机械设计与制造 .12(2015):48-50, 54. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。