中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
服务机器人拟人臂和底盘运动学建模

文献类型:期刊论文

作者甘戈; 邹风山; 刘晓帆; 徐方
刊名机械设计与制造
出版日期2016
期号3页码:163-166
关键词四自由度 运动学仿真 MDH法 拟人臂
ISSN号1001-3997
其他题名Kinematics Modeling of Service Robot Humanoid Arm and Chassis
产权排序2
通讯作者甘戈
中文摘要针对服务展示移动平台拟人手臂抓物体和移动问题,将其分为移动定位底盘和拟人抓取手臂两个基础部分。首先,构建了基于MDH法的连杆坐标系,其次从正、反运动学描述两个方面对拟人手臂进行了坐标系建模。再次把展示服务平台建模成驱动轮上的一个刚体,该服务展示平台移动定位底盘的总维数是三个:两个为移动平面中的位置信息;一个为垂直移动平面的旋量信息。最后,利用Open GL与VC6.0对四轴拟人手臂进行了仿真实验,验证了正、逆运动学求解工程的正确性。实验结果表明,该运动学建模能够反应出服务机器人真实运动情况。
英文摘要According to grabbing objects and moving problem of service robot humanoid arms,service robot can be divided into two parts of humanoid arm and location foundation. First of all,builds MDH method based on connecting rod coordinate system. Secondly describes two aspects kinematics from positive and inverse kinematics. Then puts robot modeling into a rigid body on wheel,and robot foundation is three dimensions: Two dimensions for the positions of plane;one dimension for direction along vertical axis. Finally,using the OpenGL and VC6.0 simulates four axis humanoid arms,and validates correctness of positive and inverse kinematics. The experimental results show that the kinematics modeling can reflect real service robot movement.
语种中文
源URL[http://ir.sia.cn/handle/173321/17822]  
专题沈阳自动化研究所_其他
推荐引用方式
GB/T 7714
甘戈,邹风山,刘晓帆,等. 服务机器人拟人臂和底盘运动学建模[J]. 机械设计与制造,2016(3):163-166.
APA 甘戈,邹风山,刘晓帆,&徐方.(2016).服务机器人拟人臂和底盘运动学建模.机械设计与制造(3),163-166.
MLA 甘戈,et al."服务机器人拟人臂和底盘运动学建模".机械设计与制造 .3(2016):163-166.

入库方式: OAI收割

来源:沈阳自动化研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。