Analysis of the machining stability in milling thin-walled plate
文献类型：会议论文
| 作者 | Qu S(曲胜); Zhao JB(赵吉宾) ; Wang TR(王天然)
|
| 出版日期 | 2015 |
| 会议名称 | 2015 IEEE International Conference on Robotics and Biomimetics, IEEE-ROBIO 2015 |
| 会议日期 | December 6-9, 2015 |
| 会议地点 | Zhuhai, China |
| 关键词 | thin-walled plate machining stability stability lobe diagram modal parameters |
| 页码 | 1741-1745 |
| 中文摘要 | The thin-walled plate parts are widely used in the aeronautical industry. Research on the machining stability in end milling of thin-walled plate is of great significance to improve the materials remove rates and optimize milling parameters. Analyzing the influence of milling parameters on the milling stability is conducive to choosing appropriate cutter and milling machine in actual milling. In this study, statistical variances of the dynamic displacements are employed as a chatter detection criterion to acquire the stability lobe diagram. The milling experiment results show that the obtained stability lobe diagram can predict the stability domain well. Based on this stability theory, the influences of modal parameters and tooth number on the machining stability are analyzed systematically by simulation, which is significant for choosing an appropriate cutting condition. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 3 |
| 会议录 | Proceedings of the 2015 IEEE International Conference on Robotics and Biomimetics
 |
| 会议录出版者 | IEEE |
| 会议录出版地 | Piscataway, NJ, USA |
| 语种 | 英语 |
| ISBN号 | 978-1-4673-9674-5 |
| WOS记录号 | WOS:000380476200290 |
| 源URL | [http://ir.sia.cn/handle/173321/18606]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Qu S,Zhao JB,Wang TR. Analysis of the machining stability in milling thin-walled plate[C]. 见:2015 IEEE International Conference on Robotics and Biomimetics, IEEE-ROBIO 2015. Zhuhai, China. December 6-9, 2015. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。