基于VOF的UUV水下发射装置内弹道数值模拟
文献类型:会议论文
作者 | 高启升; 谷海涛; 朱兴华; 胡志强; 王一伟 |
出版日期 | 2016 |
会议名称 | 中国兵工学会弹道专业委员会2016年弹道学术会议 |
会议日期 | 2016年10月26日 |
会议地点 | 北京 |
关键词 | UUV VOF方法 数值模拟 内弹道 |
页码 | 124-130 |
其他题名 | Internal ballistic simulation of UUV underwater launch system with VOF Method |
中文摘要 | 无人水下航行器(Unmanned Underwater Vehicle,UUV)外挂载荷进行水下发射具有重要的战术价值。目前,载荷发射主要采用自航式发射和辅助动力发射两种方式,本文所涉及的水下发射装置采用燃气动力推进方式。载荷出管过程是一个高温高速燃气与水掺混的复杂多相流和多刚体运动的耦合问题。本文通过 VOF 方法,获得载荷水动阻力,与燃气推力叠加后求解得到载荷的运动数据仿真结果。结果表明:相比同样冲量的定推力及变推力推进方式,燃气动力推进方式可以获得更高的载荷出管速度;同时,增大发射装置的环缝面积有利于降低载荷水动阻力,提高载荷出管速度。 |
英文摘要 | The load launch with UUV has the important value of tactics. At present, there are two ways for the load launch: one is swim-out launching, the other is auxiliary propulsion. In this paper, the underwater launch system adopted the gas propulsion to realize the load launch. Load propulsion by gas in tube is a complicated coupled issue that involves the mixture flow of high-speed and high-temperature gas and water and multi-body motion. The hydrodynamic resistance of load and the motion dates of the load were got by VOF method stacked with the gas thrust. It’s showed that compared with the same impulse of constant sustaining thrust and changing thrust, the gas propulsion was helpful to get the higher speed of load by results. At the same time, increasing the gap width of the load carrying device made for the decreasing resistance of load and the increase of the speed. |
产权排序 | 1 |
语种 | 中文 |
源URL | [http://ir.sia.cn/handle/173321/19575] |
专题 | 沈阳自动化研究所_海洋信息技术装备中心 |
推荐引用方式 GB/T 7714 | 高启升,谷海涛,朱兴华,等. 基于VOF的UUV水下发射装置内弹道数值模拟[C]. 见:中国兵工学会弹道专业委员会2016年弹道学术会议. 北京. 2016年10月26日. |
入库方式: OAI收割
来源:沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。