Three-dimensional surface imaging by multi-frequency phase shift profilometry with angle and pattern modeling for system calibration
文献类型：期刊论文
| 作者 | Wang ZZ(王振洲)
|
| 刊名 | Measurement Science and Technology
 |
| 出版日期 | 2016 |
| 卷号 | 27期号:8页码:1-9 |
| 关键词 | modeling phase shift profilometry 3D measurement instrumentation |
| ISSN号 | 0957-0233 |
| 产权排序 | 1 |
| 通讯作者 | 王振洲 |
| 中文摘要 | In this paper, we present a 3D surface imaging system based on the well-known phase shift profilometry. To yield the analytical solutions, four shifted phases and three high carrier frequencies are used to compute the phase map and reduce the noises that are caused by the inherent optical aberrations and external influences, e.g. different illumination light sources, uneven intensity distribution and automatic image processing algorithms. To reduce the system noise, we propose to model the pattern of the calibration grid in a virtual space. To obtain the modeled pattern, we use a plane to intercept the rays that are modeled by the proposed angle modeling method. In the world coordinate system, the angle and the pattern are computed based on the calibration data. A registration method is used to transform the modeled pattern in the virtual space to the ideal pattern in the world coordinate system by computing the least squared errors between the true points in the modeled pattern and the measured points in the practical pattern. The modeled (true) points are used for re-calibration of the 3D imaging system. Experimental results showed that the measurement accuracy increases considerably and the MSE is reduced from 0.95 mm to 0.65 mm (32% average error decrease) after replacing the measured points with the true points for calibration. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Engineering, Multidisciplinary ; Instruments & Instrumentation |
| 研究领域[WOS] | Engineering ; Instruments & Instrumentation |
| 关键词[WOS] | CAMERA CALIBRATION ; SPECULAR SURFACES ; PROJECTION ; STEREO ; MICROSCOPY ; NOISE |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| WOS记录号 | WOS:000380124800032 |
| 源URL | [http://ir.sia.cn/handle/173321/18829]  |
| 专题 | 沈阳自动化研究所_机器人学研究室 |
| 推荐引用方式 GB/T 7714 | Wang ZZ. Three-dimensional surface imaging by multi-frequency phase shift profilometry with angle and pattern modeling for system calibration[J]. Measurement Science and Technology,2016,27(8):1-9. |
| APA | Wang ZZ.(2016).Three-dimensional surface imaging by multi-frequency phase shift profilometry with angle and pattern modeling for system calibration.Measurement Science and Technology,27(8),1-9. |
| MLA | Wang ZZ."Three-dimensional surface imaging by multi-frequency phase shift profilometry with angle and pattern modeling for system calibration".Measurement Science and Technology 27.8(2016):1-9. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。