Influences of Processing Parameters on Microstructure and Properties of Laser Direct Deposited Stainless Steel Components
文献类型：会议论文
| 作者 | Zhang K(张凯); Liu WJ(刘伟军)
|
| 出版日期 | 2009 |
| 会议名称 | 2nd International Conference on Intelligent Computation Technology and Automation |
| 会议日期 | October 10-11, 2009 |
| 会议地点 | Changsha, China |
| 关键词 | processing parameter microstructure and properties laser direct deposition stainless steel component influence regulation |
| 页码 | 856-859 |
| 通讯作者 | 张凯 |
| 中文摘要 | The influences of the processing parameters on the microstructure and mechanical properties of the stainless steel thin wall parts by laser direct deposition were investigated. The results show that the obtained microstructure of the stainless steel thin walls is all composed of directionally solidified dendrites under different processing parameters, but the microstructure morphology and property values are affected by the varied parameters. Typically, the scanning speed shows the significant effects on microstructure, while the laser power exhibits the relatively weak impacts upon them. During the laser direct deposition, the processing parameters govern the shape control factor, thereby remarkably influencing the solidification microstructure shapes, characteristic scales, and mechanical properties of the as-fabricated components. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 2 |
| 会议主办者 | IEEE Intelligent Computat Soc, IEEE Comp Soc, Res Assoc Intelligent Computat Technol & Automat, Changsha Univ Sci & Technol, Hunan Univ Sci & Technol |
| 会议录 | ICICTA: 2009 SECOND INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION TECHNOLOGY AND AUTOMATION, VOL II, PROCEEDINGS
 |
| 会议录出版者 | IEEE Computer Society |
| 会议录出版地 | LOS ALAMITOS |
| 语种 | 英语 |
| ISBN号 | 978-0-7695-3804-4 |
| WOS记录号 | WOS:000275862100208 |
| 源URL | [http://ir.sia.cn/handle/173321/19851]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Zhang K,Liu WJ. Influences of Processing Parameters on Microstructure and Properties of Laser Direct Deposited Stainless Steel Components[C]. 见:2nd International Conference on Intelligent Computation Technology and Automation. Changsha, China. October 10-11, 2009. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。