合成孔径声呐几种成像算法的实现
文献类型:学位论文
作者 | 李南松 |
学位类别 | 博士 |
答辩日期 | 1999 |
授予单位 | 中国科学院声学研究所 |
授予地点 | 中国科学院声学研究所 |
关键词 | 合成孔径 声呐 成像 运动补偿 自聚焦 |
中文摘要 | 合成孔径声呐是一种新型水下成像声呐,是水声高技术的重要研究方向之一,我国已把它列入了863计划。本文的目的是在硬件设计之前,系统地研究、比较合成孔径声呐可能采用的几种算法,并探讨运动补偿和自聚焦方法。通过仿真和试验来验证它们,从原理上搞清合成孔径声呐的数据处理方法。全文主要分为以下几部分:第一章介绍合成孔径声呐的原理和它的主要特点。第二、三、四章分别介绍波束形成算法、距离-多普勒算法和波数域算法的原理、步骤和计算机仿真。第五章介绍运动补偿的基本方法和相位梯度自聚焦方法。第六章处理了湖上试验的实际数据,并且简要比较了一下这几种算法,得到一些初步的结论。附录一简要介绍了算法仿真和数据处理软件的结构和编写过程。附录二列出了主要参考与书目和文献。 |
英文摘要 | Synthetic aperture sonar (SAS) is a new kind of underwater imaging sonar. It is an important research field in underwater high technology. And has a very good applying prospect. The purpose of this paper is, before the hardware design, analyzing and comparing several algorithms that may be used. And then testing them by simulation and experiments. This paper also includes some discussion of motion compensation and auto focus method. This paper includes these parts: 1. In chapter 1, introduce the principle and the main feature of SAS. 2. Explain beam forming algorithm, range-doppler algorithm and wavenumber algorithm respectively in chapter 2,3,4. 3. Chapter 5 is used to discuss the basic method of motion compensation and the phase-gradient auto focus algorithm. 4. After processing the data from the lake experiment in chapter 6, we get some elementary conclusions. 5. At last, this paper gives the program structure and the main references in appendix 1 and 2. |
语种 | 中文 |
公开日期 | 2011-05-07 |
页码 | 56 |
源URL | [http://159.226.59.140/handle/311008/628] ![]() |
专题 | 声学研究所_声学所博硕士学位论文_1981-2009博硕士学位论文 |
推荐引用方式 GB/T 7714 | 李南松. 合成孔径声呐几种成像算法的实现[D]. 中国科学院声学研究所. 中国科学院声学研究所. 1999. |
入库方式: OAI收割
来源:声学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。