Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components
文献类型：期刊论文
| 作者 | Zhang ZT(张正涛)
|
| 刊名 | IEEE Transactions on Components, Packaging and Manufacturing Technology
 |
| 出版日期 | 2018 |
| 期号 | 0页码:0 |
| 关键词 | Brownian Motion Edge Grouping Contour Ex-traction Deep-hole Component |
| 英文摘要 | The paper focuses on the contour extraction for the inner wires of a kind of deep hole component to achieve a high-accuracy inspection. The vision system consisting of a cam-era and an endoscope is developed to acquire high-quality images of the internal structure. For the acquired images, a contour ex-traction method is proposed, which could be divided into the following steps. Firstly, the start points of wires referred as the prior information on the component are obtained with a prede-fined filter, and on the basis, several regions of interest (ROIs) are defined. Secondly, the multiscale probability of boundary (mpb) operator is utilized to detect edges in the ROIs. Thirdly, a Brownian motion model is established to calculate the connectiv-ity between edges. The prior information obtained previously is used again to determine the probabilities of the edges belonging to the contours. Finally, the symmetric ratio contour (SRC) method is used to form the wires’ contours with the edges. In the proposed method, the edges belonging to the wires’ contours are enhanced by making full use of the prior information, resulting in the im-provement in accuracy and real-time performance. As evidenced by the experiments, the proposed method can efficiently extract the inner wires’ contours from the component’s image with low contrast conditions, noises and shadows. |
| 源URL | [http://ir.ia.ac.cn/handle/173211/21667]  |
| 专题 | 精密感知与控制研究中心_精密感知与控制 精密感知与控制研究中心_人工智能与机器学习 |
| 推荐引用方式 GB/T 7714 | Zhang ZT. Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology,2018(0):0. |
| APA | Zhang ZT.(2018).Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components.IEEE Transactions on Components, Packaging and Manufacturing Technology(0),0. |
| MLA | Zhang ZT."Contour Extraction and Quality Inspection for Inner Structure of Deep Hole Components".IEEE Transactions on Components, Packaging and Manufacturing Technology .0(2018):0. |
入库方式： OAI收割
来源：自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。