Fabrication of Degradable Intervertebral Fusion with Good Mechanical Properties and Biocompatibility Based on 3D Printing Technology
文献类型：会议论文
| 作者 | Zheng XF(郑雄飞) ; Wang HR(王赫然); Wang Q(王强)
|
| 出版日期 | 2017 |
| 会议名称 | 6th International Conference on Measurement, Instrumentation and Automation (ICMIA) |
| 会议日期 | June 29-30, 2017 |
| 会议地点 | Zhuhai, CHINA |
| 关键词 | 3D printing technology Intervertebral fusion stent Mechanical properties technological method |
| 页码 | 595-600 |
| 通讯作者 | Wang Q(王强) |
| 中文摘要 | In this paper, the manufacture method of degradable intervertebral fusion stent with good mechanical properties and biocompatibility based on 3D printing technology is researched. Firstly, the mixing process of synthetic macromolecule and bioceramic powder is studied. And develop a high temperature stirring grinding device and realize arbitrary proportion of composite materials. Secondly, the intervertebral fusion model is processed and the print path is optimized based on discrete allocation algorithm of modeling section of cylindrical structure and print trajectory optimization algorithm. Then, the influence of printing temperature and printing layer on the bonding strength of the stent is studied, which provides a theoretical basis for the reasonable parameters setting. In addition, the composite for stent is studied, with different materials in different ratios are mixed and compressive strength and compressive modulus of each stent are tested. The ratio of composite with good mechanical strength is obtained. Finally, the intervertebral cage stent is constructed with good mechanical properties and biocompatibility. |
| 收录类别 | CPCI（ISTP） |
| 产权排序 | 1 |
| 会议录 | PROCEEDINGS OF THE 2017 6TH INTERNATIONAL CONFERENCE ON MEASUREMENT, INSTRUMENTATION AND AUTOMATION (ICMIA 2017)
 |
| 会议录出版者 | ATLANTIS PRESS |
| 会议录出版地 | PARIS |
| 语种 | 英语 |
| ISSN号 | 1951-6851 |
| ISBN号 | 978-94-6252-387-6 |
| WOS记录号 | WOS:000415010800107 |
| 源URL | [http://ir.sia.cn/handle/173321/21238]  |
| 专题 | 沈阳自动化研究所_机器人学研究室 |
| 作者单位 | 1.State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, China 2.School of mechanical engineering, Shenyang Ligong University, Shenyang, China |
| 推荐引用方式 GB/T 7714 | Zheng XF,Wang HR,Wang Q. Fabrication of Degradable Intervertebral Fusion with Good Mechanical Properties and Biocompatibility Based on 3D Printing Technology[C]. 见:6th International Conference on Measurement, Instrumentation and Automation (ICMIA). Zhuhai, CHINA. June 29-30, 2017. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。