The fabrication of Au nanowire by phase-control mode of USV-assisted AFM nanomachining
文献类型:会议论文
作者 | Shi JL(施佳林)1,2; Cong Y(丛杨)1; Yu P(于鹏)1; Liu LQ(刘连庆)1; Wang HG(王洪光)![]() ![]() ![]() |
出版日期 | 2017 |
会议名称 | 2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017 |
会议日期 | December 5-8, 2017 |
会议地点 | Macau, China |
关键词 | AFM nanomachining ultrasonic vibration nanowire fabrication |
页码 | 1124-1129 |
通讯作者 | Liu LQ(刘连庆) |
中文摘要 | This paper proposed Au nanowire fabrication method combining the phase-control mode of nanomachining and the lift-off process. The conventional force-control mode of AFM nanomachining has many drawbacks such as stick-slip motion of machining, unable to directly control the machining depth, under-cutting and over-cutting. These drawbacks will lead to invalid nanopattern of resist or severe tip wear. The phase-control mode can avoid these drawbacks of conventional force-control mode. After patterning the nanogrooves by phase-control mode nanomachinng, the lift-off process is utilized to fabricate Au nanowire. Experimental result shows that width of fabricated nanowire is ∼ 50 nm. The present method also demonstrates the potential on the fabrication of three-dimension nanostructures and nanoelectronic device. |
收录类别 | EI |
产权排序 | 1 |
会议主办者 | Beijing Institute of Technology; City University of Hong Kong; IEEE Robotics and Automation Society; Shenzhen Academy of Robotics; University of Hong Kong; University of Macau |
会议录 | Proceedings of the 2017 IEEE International Conference on Robotics and Biomimetics
![]() |
会议录出版者 | IEEE |
会议录出版地 | New York |
语种 | 英语 |
ISBN号 | 978-1-5386-3741-8 |
源URL | [http://ir.sia.cn/handle/173321/22189] ![]() |
专题 | 沈阳自动化研究所_空间自动化技术研究室 |
作者单位 | 1.State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China 2.University of Chinese Academy of Sciences, Beijing 100049, China |
推荐引用方式 GB/T 7714 | Shi JL,Cong Y,Yu P,et al. The fabrication of Au nanowire by phase-control mode of USV-assisted AFM nanomachining[C]. 见:2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017. Macau, China. December 5-8, 2017. |
入库方式: OAI收割
来源:沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。