Impact of shoulder concavity on non-tool-tilt friction stir welding of 5052 aluminum alloy
文献类型：期刊论文
| 作者 | Zhang X(张骁); Yu T(于涛) ; Wu ZQ(吴振强); Zhang HJ(张会杰); Wang M(王敏); Zhu Z(朱智)
|
| 刊名 | International Journal of Advanced Manufacturing Technology
 |
| 出版日期 | 2018 |
| 卷号 | 96期号:1-4页码:1497-1506 |
| 关键词 | Non-tool-tilt friction stir welding Shoulder concavity Aluminum alloy Joint performance |
| ISSN号 | 0268-3768 |
| 产权排序 | 1 |
| 通讯作者 | Zhang HJ(张会杰) |
| 中文摘要 | In regard to the non-tool-tilt friction stir welding (NTT-FSW) process, the shoulder concavity has significant effects on the control of heat generation and material flow, and thus is an important geometrical feature for the tool design. In this paper, three types of shoulder concavity angles (SCAs), i.e., 0°, 5°, and 10°, were selected to explore the impact of SCA on the NTT-FSW of 5052 aluminum alloy. The results indicate that the increase of SCA lowers the tool axial force, reduces the nugget width, and weakens the band structure in the nugget. A weakening of shoulder thermal effect occurs from 0° to 5° SCA, leading to an improvement of the structure-property of the NTT-FSW joint. Further increasing the SCA to 10° causes the generation of the secondary sliding frictional heat at the interface between the shoulder-driven material and the base material, and thus the shoulder thermal effect does not show a continuous weakening trend as expected but becomes stronger instead, resulting in the deterioration of the microstructure evolution and the degradation of the tensile strength of NTT-FSW joint. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Automation & Control Systems ; Engineering, Manufacturing |
| 研究领域[WOS] | Automation & Control Systems ; Engineering |
| 关键词[WOS] | MECHANICAL-PROPERTIES ; MATERIAL FLOW ; PARAMETERS ; HEAT ; MICROSTRUCTURE ; EVOLUTION ; GEOMETRY |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| WOS记录号 | WOS:000428797500117 |
| 源URL | [http://ir.sia.cn/handle/173321/21522]  |
| 专题 | 沈阳自动化研究所_空间自动化技术研究室 |
| 作者单位 | 1.School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China 2.State Key Laboratory of Robotics, Shenyang Institute of Automation Chinese Academy of Sciences, Shenyang 110016, China |
| 推荐引用方式 GB/T 7714 | Zhang X,Yu T,Wu ZQ,et al. Impact of shoulder concavity on non-tool-tilt friction stir welding of 5052 aluminum alloy[J]. International Journal of Advanced Manufacturing Technology,2018,96(1-4):1497-1506. |
| APA | Zhang X,Yu T,Wu ZQ,Zhang HJ,Wang M,&Zhu Z.(2018).Impact of shoulder concavity on non-tool-tilt friction stir welding of 5052 aluminum alloy.International Journal of Advanced Manufacturing Technology,96(1-4),1497-1506. |
| MLA | Zhang X,et al."Impact of shoulder concavity on non-tool-tilt friction stir welding of 5052 aluminum alloy".International Journal of Advanced Manufacturing Technology 96.1-4(2018):1497-1506. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。