Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy
文献类型：期刊论文
| 作者 | Gao MQ(高孟秋)2,3; Song, Hongwu1; Wang ZG(王志国)2,3 ; Zhao YH(赵宇辉)2,3; Zhao JB(赵吉宾)2,3; Gao Y(高元)2,3,4
|
| 刊名 | Vacuum
 |
| 出版日期 | 2019 |
| 卷号 | 167页码:471-478 |
| 关键词 | Laser deposition AlSi10Mg alloy Processing parameter Pore defect |
| ISSN号 | 0042-207X |
| 产权排序 | 1 |
| 英文摘要 | In order to investigate the influences of different processing parameters to the defects feature and microstructure of the Laser Direct Metal Deposited AlSi10Mg alloy parts, AlSi10Mg alloy depositing experiments were carried out using various scanning speed, carrier gas flow rate and laser incidence directions. The effects of the above parameters to the inner defects feature and microstructure of the deposited layers were obtained through analyzing the metallographic samples. And the causes of the pore defects inside the samples were analyzed and speculated. To verified the conclusions, tensile tests were implemented. It is discovered that increasing the scanning speed properly during depositing can reduce the pores generated by both hydrogen and trapped external gases, and have positive impact to the microstructure and microhardness of the samples. In addition, increasing the carrier gas flow rate will dramatically worsen the defects feature, and deflecting the laser incidence direction to obtuse angle to the laser scanning direction can lessen the number and the size of pore defects. |
| WOS关键词 | MICROSTRUCTURE ; POROSITY |
| 资助项目 | National Key Research and Development Program of China[2018YFB1105802] ; National Key Research and Development Program of China[2017YFB110400] ; National Key Research and Development Program of China[2016YFB1102002] ; National Natural Science Foundation of China[51805526] |
| WOS研究方向 | Materials Science ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:000482245800067 |
| 资助机构 | National Key Research and Development Program of China ; National Natural Science Foundation of China |
| 源URL | [http://ir.sia.cn/handle/173321/25309]  |
| 专题 | 工艺装备与智能机器人研究室 |
| 通讯作者 | Zhao YH(赵宇辉) |
| 作者单位 | 1.Institute of Metal Research, Chinese Academy of Sciences, Shenyang, Liaoning 110016, China 2.Institute of Robotics and Intelligent Manufacturing Innovation, Chinese Academy of Sciences, Shenyang, Liaoning 110016, China 3.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, Liaoning 110016, China 4.School of Mechanical Engineering and Automation, Northeastern University, Shenyang, Liaoning 110004, China |
| 推荐引用方式 GB/T 7714 | Gao MQ,Song, Hongwu,Wang ZG,et al. Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy[J]. Vacuum,2019,167:471-478. |
| APA | Gao MQ,Song, Hongwu,Wang ZG,Zhao YH,Zhao JB,&Gao Y.(2019).Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy.Vacuum,167,471-478. |
| MLA | Gao MQ,et al."Effect of processing parameters on solidification defects behavior of laser deposited AlSi10Mg alloy".Vacuum 167(2019):471-478. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。