Analysis and Research on Mismatch in Tailored Blank Laser Welding
文献类型：会议论文
| 作者 | Xin LM(辛立明); Xu ZG(徐志刚) ; Zhao MY(赵明扬); Zhu TX(朱天旭)
|
| 出版日期 | 2008 |
| 会议名称 | IEEE Conference on Robotics, Automation, and Mechatronics |
| 会议日期 | September 21-24, 2008 |
| 会议地点 | Chengdu, China |
| 关键词 | Mismatch Tailored Blank Laser Welding Origins of the mismatch Mathematical model for mismatch |
| 页码 | 415-420 |
| 中文摘要 | Mismatch is an important quality evaluation standard in Tailor Welded Blanks. The control of mismatch, especially for thinner blanks, is a difficult technique in Tailored Blank Laser Welding process. In this paper, the production and control of mismatch is studied based on a Tailored Blank Laser Welding system. The origins of the mismatch are obtained after numbers of experiments: the deformation of the blanks before welding, the intensity of the clamping force, the uniformity of the clamping force, the deformation of the clamping beam, the flatness error of the based platform and the welding process. A mathematical model is established according to the analysis of the origins producing mismatch. Experimental results indicate that the model provides an effective theory in increasing welding quality. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 1 |
| 会议主办者 | IEEE |
| 会议录 | 2008 IEEE CONFERENCE ON ROBOTICS, AUTOMATION, AND MECHATRONICS, VOLS 1 AND 2
 |
| 会议录出版者 | IEEE |
| 会议录出版地 | NEW YORK |
| 语种 | 英语 |
| ISBN号 | 978-1-4244-1675-2 |
| WOS记录号 | WOS:000269060400077 |
| 源URL | [http://ir.sia.cn/handle/173321/7872]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Xin LM,Xu ZG,Zhao MY,et al. Analysis and Research on Mismatch in Tailored Blank Laser Welding[C]. 见:IEEE Conference on Robotics, Automation, and Mechatronics. Chengdu, China. September 21-24, 2008. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。