Process Research on the Laser Rapid Manufacturing Technology
文献类型：会议论文
| 作者 | Zhang K(张凯); Liu WJ(刘伟军) ; Shang XF(尚晓峰)
|
| 出版日期 | 2009 |
| 会议名称 | 2009 International Conference on Manufacturing Science and Engineering, ICMSE 2009 |
| 会议日期 | December 26-28, 2009 |
| 会议地点 | Zhuhai, China |
| 关键词 | laser rapid manufacturing stainless steel 316 CET (Columnar to Equiaxed Transition) directional solidification metallurgical bonding |
| 页码 | 4042-4045 |
| 中文摘要 | Laser additive direct deposition of metals is a new rapid manufacturing technology, which combines with computer aided design, laser cladding and rapid prototyping. The advanced technology can build fully-dense metal components directly from the information transferred from a computer file by depositing metal powders layer by layer with neither mould nor tool. Based on the theory of this technology, an experimental setup for laser rapid manufacturing process was developed. Through this state-of-the-art automated apparatus, some cladding experiments were performed to grasp the process features of laser rapid manufacturing technology. Finally, the columnar/equiaxed grain growth transition model is used to explain the morphology characteristic. Accordingly, the appropriate microstructure can be obtained by adjusting the processing parameters. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 2 |
| 会议主办者 | University of Wollongong (UOW) |
| 会议录 | Advanced Materials Research
 |
| 会议录出版者 | Trans Tech Publications |
| 会议录出版地 | Clausthal-Zellerfeld, Germany |
| 语种 | 英语 |
| ISSN号 | 1022-6680 |
| ISBN号 | 978-0-87849-280-0 |
| WOS记录号 | WOS:000279864702094 |
| 源URL | [http://ir.sia.cn/handle/173321/7902]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Zhang K,Liu WJ,Shang XF. Process Research on the Laser Rapid Manufacturing Technology[C]. 见:2009 International Conference on Manufacturing Science and Engineering, ICMSE 2009. Zhuhai, China. December 26-28, 2009. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。