The Effect of Processing Parameters on Performance of Laser Welding Tailored Blanks of Different Thickness
文献类型：会议论文
| 作者 | Xu ZG(徐志刚) ; Ha L(哈乐); Gan HY(甘洪岩)
|
| 出版日期 | 2011 |
| 会议名称 | 2011 Second International Conference on Digital Manufacturing and Automation (ICDMA 2011) |
| 会议日期 | August 5-7, 2011 |
| 会议地点 | Zhangjiajie, China |
| 关键词 | laser welding inconsistency welding speed waist sharp corner defocus offset |
| 页码 | 1279-1283 |
| 中文摘要 | There are some deficiencies such as inconsistency, oversize waist, and sharp corner in the cross-section of the welding seam. Orthogonal test is conducted under different speed, defocus, and offset. The metallic phase of the seam is observed by using electronic microscope. By analyzing the results of Erichsen test and tensile test, the effect of processing parameters on the performance of the seam is studied. The results show that deep punching performance will be improved and the waist will be reduced when the welding speed is increased. If the defocus is a quarter of the thick blank thickness and the offset value is 0.1mm, the surface of the welding seam will be smooth. |
| 收录类别 | EI |
| 产权排序 | 1 |
| 会议主办者 | Central South Univ. |
| 会议录 | Proceedings of the 2011 Second International Conference on Digital Manufacturing and Automation (ICDMA 2011)
 |
| 会议录出版者 | IEEE Computer Society |
| 会议录出版地 | Los Alamitos, CA, USA |
| 语种 | 英语 |
| ISBN号 | 978-1-4577-0755-1 |
| 源URL | [http://ir.sia.cn/handle/173321/7926]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Xu ZG,Ha L,Gan HY. The Effect of Processing Parameters on Performance of Laser Welding Tailored Blanks of Different Thickness[C]. 见:2011 Second International Conference on Digital Manufacturing and Automation (ICDMA 2011). Zhangjiajie, China. August 5-7, 2011. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。