Influences of processing parameters on dilution ratio of laser cladding layer during laser metal deposition shaping
文献类型：会议论文
| 作者 | Zhang K(张凯); Zhang XM(张新敏); Liu WJ(刘伟军)
|
| 出版日期 | 2012 |
| 会议名称 | 2nd International Symposium on Chemical Engineering and Material Properties, ISCEMP 2012 |
| 会议日期 | June 22-24, 2012 |
| 会议地点 | Taiyuan, China |
| 关键词 | Chemical engineering Dilution Laser cladding - Rapid prototyping |
| 页码 | 785-789 |
| 中文摘要 | Laser Metal Deposition Shaping (LMDS) is a state-of-the-art technology that combines rapid prototyping and laser processing. There are many factors affecting the quality, precision, microstructure and performance of LMDS-deposited parts. Among them, dilution ratio is a significant one since it is not only an important index to judge the laser cladding quality, but directly affects the interlayer bonding strength and performance quality of as-formed metal parts. Thus, the substantial LMDS experiments were performed to conclude the influence of processing parameters on dilution ratio of laser cladding layer. The results indicate that the influence degree of scanning speed is most significant, while that of laser power is relatively slight. In order to ensure the perfect forming quality and strong metallurgical bonding, it is necessary to choose suitable dilution ratio to accomplish the LMDS process. |
| 收录类别 | EI |
| 产权排序 | 2 |
| 会议录 | Advanced Materials Research
 |
| 会议录出版者 | Trans Tech Publications |
| 会议录出版地 | Clausthal-Zellerfeld, Germany |
| 语种 | 英语 |
| ISSN号 | 1022-6680 |
| ISBN号 | 978-3-03785-454-9 |
| 源URL | [http://ir.sia.cn/handle/173321/10149]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Zhang K,Zhang XM,Liu WJ. Influences of processing parameters on dilution ratio of laser cladding layer during laser metal deposition shaping[C]. 见:2nd International Symposium on Chemical Engineering and Material Properties, ISCEMP 2012. Taiyuan, China. June 22-24, 2012. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。