Rapid robot/workcell calibration using line-based approach
文献类型：会议论文
| 作者 | Liu, Yong ; Shen, Yantao; Yang, Ruiguo; Li, Xiongzi; Zhang, George; Fuhlbrigge, Thomas A.; Liu, Y.
|
| 出版日期 | 2008 |
| 会议日期 | August 23-26, 2008 |
| 会议地点 | Washington, DC, USA |
| 页码 | 510-515 |
| 英文摘要 | This paper presents a new line-based calibration method for automatically computing the transformation relationship between industrial robots and workcell. The calibration method mainly depends on the position-sensitive detector (PSD) servo control of the robots. The developed servo controller allows precisely positioning the laser beam (line) from a single laser pointer attached at the end-effector of robot onto the center of the PSD in a well-designed lateral-effect PSDs fixture. The selected PSD in the fixture has high performance with the resolution of 0.5μ. Once the precision localizations/positioning in the centers of multiple PSDs are achieved, the group of points in the robot base frame and workcell frame can be generated by using the intersection of laser beams (lines) and by using the predefined fixture-workcell information, respectively. A quaternion algorithm and the least square method are then employed to determine the transformation relationship between robot base frame and workcell frame. The experiments have been implemented on an ABB industrial robot IRB1600, the results verify the effectiveness of both the PSD servoing and the line-based calibration method as well as demonstrate the performance of the whole system. |
| 源文献作者 | TOYOTA; ABB; GM; QUALTECH SYSTEMS INC.; SPANSION |
| 产权排序 | 3 |
| 会议录 | 4th IEEE Conference on Automation Science and Engineering, CASE 2008
 |
| 会议录出版者 | IEEE Computer Society |
| 会议录出版地 | Piscataway, NJ, USA |
| 语种 | 英语 |
| ISBN号 | 978-1-4244-2023-0 |
| WOS记录号 | WOS:000261320400084 |
| 源URL | [http://ir.sia.cn/handle/173321/20027]  |
| 专题 | 沈阳自动化研究所_机器人学研究室 |
| 作者单位 | 1.Nanjing University of Science and Technology, Nanjing, China 2.Shenyang Institute of Automation, Chinese Academy of Science, Shenyang, China 3.ABB Corporate Research Center, ABB Inc., Windsor, CT 06095, United States 4.Department of Electrical and Computer Engineering Michigan State University, East Lansing, MI 48824, United States 5.Department of Electrical and Biomedical Engineering, University of Nevada, Reno, NV 89557, United States |
| 推荐引用方式 GB/T 7714 | Liu, Yong,Shen, Yantao,Yang, Ruiguo,et al. Rapid robot/workcell calibration using line-based approach[C]. 见:. Washington, DC, USA. August 23-26, 2008. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。