Kinematics Solution of Snake-like Manipulator Based on Improved Backbone Mode Method
文献类型：会议论文
| 作者 | Wang Z(王轸)1,2,3; Chang J(常健)1,2 ; Li B(李斌)1,2; Wang C(王聪)1,2; Liu C(刘春)1,2
|
| 出版日期 | 2020 |
| 会议日期 | October 13-16, 2020 |
| 会议地点 | Beijing, China |
| 关键词 | snake-like manipulator improved backbone mode method forward kinematics inverse kinematics |
| 页码 | 1774-1779 |
| 英文摘要 | Snake-like manipulator has the advantage of high degrees of freedom, suitable for some complex working environment. But the inverse kinematics of the hyper-redundant manipulator is difficult. In this paper, an improved backbone mode method is presented. Firstly, the kinematic model of snakelike manipulator is established by using the modified D-H method and MATLAB (Robotics Toolbox). The continuous equations of point coordinates in the original backbone mode method was transformed into the discrete equations, and the angles of each degree of freedom were obtained by the coordinates of each node, and the joints of the manipulator are smoothed to reduce the angles of some joints. Finally, the result shows that the improved backbone mode method is higher than the original backbone mode method in computational efficiency and accuracy through MATLAB simulation. |
| 产权排序 | 1 |
| 会议录 | 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020
 |
| 会议录出版者 | IEEE |
| 会议录出版地 | New York |
| 语种 | 英语 |
| ISBN号 | 978-1-7281-6415-1 |
| 源URL | [http://ir.sia.cn/handle/173321/27960]  |
| 专题 | 沈阳自动化研究所_机器人学研究室 |
| 通讯作者 | Wang Z(王轸); Chang J(常健) |
| 作者单位 | 1.Institutes for Robotics and Intelligent Manufacturing, Chinese Academy of Sciences, 110169, Shenyang 2.State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, 110016, Shenyang 3.University of Chinese Academy of Sciences, 100049, Beijing |
| 推荐引用方式 GB/T 7714 | Wang Z,Chang J,Li B,et al. Kinematics Solution of Snake-like Manipulator Based on Improved Backbone Mode Method[C]. 见:. Beijing, China. October 13-16, 2020. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。