Research on Dynamic Models and Performances of Shield Tunnel Boring Machine Cutterhead Driving System
文献类型：期刊论文
| 作者 | Li XH(李先宏) ; Yu HB(于海斌); Yuan MZ(苑明哲); Zhao, Yu
|
| 刊名 | ADVANCES IN MECHANICAL ENGINEERING
 |
| 出版日期 | 2013 |
| 卷号 | 2013页码:1-29 |
| 关键词 | Activated Sludge Process Dynamic Models Environmental Regulations Optimal Control Systems Problem Solving Wastewater Treatment |
| ISSN号 | 1687-8140 |
| 产权排序 | 1 |
| 英文摘要 | A general nonlinear time-varying (NLTV) dynamic model and linear time-varying (LTV) dynamic model are presented for shield tunnel boring machine (TBM) cutterhead driving system, respectively. Different gear backlashes and mesh damped and transmission errors are considered in the NLTV dynamic model. The corresponding multiple-input and multiple-output (MIMO) state space models are also presented. Through analyzing the linear dynamic model, the optimal reducer ratio (ORR) and optimal transmission ratio (OTR) are obtained for the shield TBM cutterhead driving system, respectively. The NLTV and LTV dynamic models are numerically simulated, and the effects of physical parameters under various conditions of NLTV dynamic model are analyzed. Physical parameters such as the load torque, gear backlash and transmission error, gear mesh stiffness and damped, pinions inertia and damped, large gear inertia and damped, and motor rotor inertia and damped are investigated in detail to analyze their effects on dynamic response and performances of the shield TBM cutterhead driving system. Some preliminary approaches are proposed to improve dynamic performances of the cutterhead driving system, and dynamic models will provide a foundation for shield TBM cutterhead driving system's cutterhead fault diagnosis, motion control, and torque synchronous control. |
| WOS研究方向 | Thermodynamics ; Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000315233800001 |
| 资助机构 | the national High Technology Research Development Plan Project nos. 2007BAF09B01, 2009AA04Z155, and KGCX2-EW-104. A partial content of this paper taken from previous work was presented at the 37th Annual Conference of the IEEE Industrial Electronics Society, Melbourne, VIC, Australia, on November 7-10, 2011. |
| 公开日期 | 2013-04-21 |
| 源URL | [http://ir.sia.cn/handle/173321/10586]  |
| 专题 | 沈阳自动化研究所_信息服务与智能控制技术研究室 |
| 通讯作者 | Yu HB(于海斌) |
| 作者单位 | 1.Department of Information Service and Intelligent Control, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China 2.NHI Shenyang Heavy Machinery Group TBM Company, Shenyang 110025, China 3.University of Chinese Academy of Sciences (Graduate School of Chinese Academy of Sciences), Beijing 100039, China |
| 推荐引用方式 GB/T 7714 | Li XH,Yu HB,Yuan MZ,et al. Research on Dynamic Models and Performances of Shield Tunnel Boring Machine Cutterhead Driving System[J]. ADVANCES IN MECHANICAL ENGINEERING,2013,2013:1-29. |
| APA | Li XH,Yu HB,Yuan MZ,&Zhao, Yu.(2013).Research on Dynamic Models and Performances of Shield Tunnel Boring Machine Cutterhead Driving System.ADVANCES IN MECHANICAL ENGINEERING,2013,1-29. |
| MLA | Li XH,et al."Research on Dynamic Models and Performances of Shield Tunnel Boring Machine Cutterhead Driving System".ADVANCES IN MECHANICAL ENGINEERING 2013(2013):1-29. |
入库方式： OAI收割
来源：沈阳自动化研究所
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。