Research on feasibility verification method of pipe bending angle correction
文献类型：会议论文
| 作者 | Guo WS(郭威帅); Guo R(郭锐) ; Sun HH(孙宏浩); Wang W(王伟); Yang X(杨旭)
|
| 出版日期 | 2021 |
| 会议日期 | May 14-16, 2021 |
| 会议地点 | Hangzhou, China |
| 页码 | 1-7 |
| 英文摘要 | Certain types of rocket engine pipes can only be cut perpendicular to the axis when cutting margins. In order to verify whether the pipeline can achieve the cutting margin perpendicular to the axis by correcting the bend angle, and finally perform accurate assembly, a verification method based on SolidWorks to simulate the pipe shaping process is proposed. First, the pipe model was reconstructed by using the measurement data. Second, the lengths of the pipe segments, the angles between the line segments and the angles between adjacent surfaces were extracted. Third, the simplified pipe model and interface model were established and assembled in SolidWorks. Finally, the angle constraints of the adjacent surfaces were added, and the angle constraints of the line segments were released. According to the assembly results, the feasibility of solving the problem through shape correction was analysed. Experiments show that this method can effectively verify the feasibility of the shape of the elbow, and also provide the shape of the pipe after the correction and the angle of each elbow. |
| 会议录 | 2021 2nd International Conference on Internet of Things, Artificial Intelligence and Mechanical Automation, IoTAIMA 2021
 |
| 会议录出版者 | IOP |
| 会议录出版地 | Bristol, UK |
| 语种 | 英语 |
| ISSN号 | 1742-6588 |
| 源URL | [http://ir.sia.cn/handle/173321/29320]  |
| 专题 | 沈阳自动化研究所_智能检测与装备研究室 |
| 通讯作者 | Guo WS(郭威帅) |
| 作者单位 | 1.Institutes for Robotics and Intelligent Manufacturing, Chinese Academy of Sciences,Shenyang, 110169, China 2.Key Laboratory on Intelligent Detection and Equipment Technology of Liaoning Province, Shenyang, 100179, China 3.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang, 110016, China 4.University of Chinese Academy of Sciences, Beijing, 100049, China |
| 推荐引用方式 GB/T 7714 | Guo WS,Guo R,Sun HH,et al. Research on feasibility verification method of pipe bending angle correction[C]. 见:. Hangzhou, China. May 14-16, 2021. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。