TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing
文献类型：期刊论文
| 作者 | He ZF(何振丰)1,2 ; Zhao JB(赵吉宾)1,2; Zhao YH(赵宇辉)1,2; Wang ZG(王志国)1,2; Shang, Chun3; He C(贺晨)1,2
|
| 刊名 | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
 |
| 出版日期 | 2022 |
| 页码 | 1-5 |
| 关键词 | Additive manufacturing laser metal deposition bimetallic structures interface crack detection phased array ultrasonic testing |
| ISSN号 | 0954-4062 |
| 产权排序 | 1 |
| 英文摘要 | Additive manufacturing of bimetallic structures has become a hotspot in recent years. However, the interfaces of bimetallic structures are always the weaknesses, and cracks always occur at the interfaces. Three bimetallic samples of TA15 and Inconel 625 were manufactured by laser metal deposition, and the effect of laser power on the manufacturing quality was analyzed. Then phased array ultrasonic testing (PAUT) technique was applied for crack detection for the three samples, and metallographic analysis was employed to verify detection results. The results showed that the increase of laser power can eliminate macro-cracks at the interface of the bimetallic sample, and micro-cracks at the interface can be detected by PAUT. |
| 语种 | 英语 |
| WOS记录号 | WOS:000772417600001 |
| 资助机构 | Special Funds for the Central Government to Guide Local Scientific and Technological Development (Grant No. 2021JH6/10500119). |
| 源URL | [http://ir.sia.cn/handle/173321/30610]  |
| 专题 | 工艺装备与智能机器人研究室 |
| 通讯作者 | Zhao JB(赵吉宾); Zhao YH(赵宇辉) |
| 作者单位 | 1.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China 2.Institutes for Robotics and Intelligent Manufacturing, Chinese Academy of Sciences, Shenyang 110169, China 3.School of Material Science and Engineering, Shenyang University of Technology, Shenyang 110870, China |
| 推荐引用方式 GB/T 7714 | He ZF,Zhao JB,Zhao YH,et al. TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2022:1-5. |
| APA | He ZF,Zhao JB,Zhao YH,Wang ZG,Shang, Chun,&He C.(2022).TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing.Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,1-5. |
| MLA | He ZF,et al."TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing".Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022):1-5. |
入库方式： OAI收割
来源：沈阳自动化研究所
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。