NIPS derived three-dimensional porous copper membrane for high-energy-density lithium-ion batteries
文献类型:会议论文
作者 | Guan, Xinxin; Zhang, Zhijia; Zhang, Shaofei; Wang, Yixiao; Yang, Huan; Wang, Jiamin; Li, Ming; Lu, Huanming; Li, Yong; Huang, Qin |
出版日期 | 2019 |
会议日期 | MAY 08-11, 2018 |
关键词 | CURRENT COLLECTOR ANODE MATERIALS PERFORMANCE GRAPHENE OXIDE STORAGE DESIGN |
卷号 | 312 |
DOI | 10.1016/j.electacta.2019.04.151 |
英文摘要 | Increasing the capacity of electrode has attracted widespread attention for obtaining high energy density lithium-ion batteries. Here we report the controllable preparation strategy of three-dimensional porous Cu membrane to achieve this goal. Nonsolvent induce phase separation and heat treatment are synergistically used in the preparation of three-dimensional porous Cu membrane, which inherits the well developed three-dimensional channels and appropriate pore size (3-10 mu m) from polymer architecture. The novel electrode, composing with three-dimensional porous Cu membrane and ball-milled graphite, exhibits a high initial reversible discharge specific gravimetric capacity of 858.4 mAhg(-1) and volumetric capacity of 539.6 mAh cm(-3), respectively. Meanwhile, the composite electrode shows a good rate capability (183.5 mAhg(-1) at high rate of 2C) as well as a high reversible capacity of 660.2 mAh g(-1) (415 mAh cm(-3)) with capacity retention of 76.9% after 150 cycles at 0.1C. The three-dimensional porous Cu membrane, acting as current collector, can not only load more nano-sized active material (4.4 mg cm(-2)), but also shorten the electron/ion transport paths, which may pave way to optimize the design of high energy density electrode for energy storage system. (C) 2019 Elsevier Ltd. All rights reserved. |
学科主题 | Electrochemistry |
ISSN号 | 0013-4686 |
源URL | [http://ir.nimte.ac.cn/handle/174433/23332] ![]() |
专题 | 会议专题 会议专题_会议论文 |
推荐引用方式 GB/T 7714 | Guan, Xinxin,Zhang, Zhijia,Zhang, Shaofei,et al. NIPS derived three-dimensional porous copper membrane for high-energy-density lithium-ion batteries[C]. 见:. MAY 08-11, 2018. |
入库方式: OAI收割
来源:宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。