中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Structure and properties of sintered MM-Fe-B magnets

文献类型:会议论文

作者Shang, R. X.; Xiong, J. F.; Li, R.; Zuo, W. L.; Zhang, J.; Zhao, T. Y.; Chen, R. J.; Sun, J. R.; Shen, B. G.
出版日期2017
会议日期OCT 31-NOV 04, 2016
关键词PERMANENT-MAGNETS RARE-EARTH MICROSTRUCTURE ALLOYS CE ND
卷号7
期号5
DOI10.1063/1.4973603
英文摘要MM14Fe79.9B6.1 magnets were prepared by conventional sintering method. The Curie temperature of the sintered MM2Fe14B magnet was about 210 degrees C. When the sintering temperature increased from 1010 degrees C to 1030 degrees C, the density of the magnet increased from 6.85 g/cm(3) to 7.52 g/cm(3). After the first stage tempering at 900 degrees C, the (BH) max and H-cj had a slight increase. The maximum value of (BH)(max) = 7.6 MGOe and H-cj = 1080 Oe was obtained when sintered at 1010 degrees C and tempering at 900 degrees C, respectively. The grain size grew very large when the sintering temperature increased to 1050 degrees C, and the magnetic properties deteriorated rapidly. La reduced by similar to 7.5 at. % in grains, which is almost equal to the increased percentage of Nd. That is mainly because La-Fe-B is very difficult to form the 2: 14: 1 phase. (C) 2017 Author(s).
学科主题Science & Technology - Other Topics ; Materials Science ; Physics
ISSN号2158-3226
源URL[http://ir.nimte.ac.cn/handle/174433/23418]  
专题会议专题
会议专题_会议论文
推荐引用方式
GB/T 7714
Shang, R. X.,Xiong, J. F.,Li, R.,et al. Structure and properties of sintered MM-Fe-B magnets[C]. 见:. OCT 31-NOV 04, 2016.

入库方式: OAI收割

来源:宁波材料技术与工程研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。