Surface quality for rotary ultrasonic milling of quartz glass employing diamond ball end tool with tool inclination angle
文献类型：会议论文
| 作者 | Chen, Xiaoxiao; Tian, Chuanxin; Huang, Yihui; Li, Dexin; Wang, Hao; Zhang, Wenwu |
| 出版日期 | 2017 |
| 会议日期 | NOV 28-30, 2016 |
| 关键词 | CUTTING PROCESS MODEL |
| 卷号 | 174 |
| DOI | 10.1016/j.proeng.2017.01.154 |
| 英文摘要 | Nowadays, quartz glass is widely used in many industry fields. The machined surface quality is an important issue in the ultrasonic milling of quartz glass with diamond ball end tool. This paper analyzed the movement characteristics of the engaged cutting abrasive particles and investigated the effects of spindle rotation speed, feed speed, width of cut, and depth of cut on the machined surface topography and surface roughness. Also, comparisons of machining effects with and without ultrasonic were carried out. In general, application of ultrasonic vibration needs to cooperate with other process parameters to give play to the advantages of RUM, and ultrasonic function could not necessarily improve the formed surface. Comparing with conventional milling, reasonable selection of process parameters could decrease the machined surface roughness under the premise of achieving a high materials removal rate for RUM. (C) 2017 The Authors. Published by Elsevier Ltd. |
| 会议录出版者 | Procedia Engineering |
| 学科主题 | Engineering |
| ISSN号 | 1877-7058 |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/23427]  |
| 专题 | 会议专题 会议专题_会议论文 |
| 推荐引用方式 GB/T 7714 | Chen, Xiaoxiao,Tian, Chuanxin,Huang, Yihui,et al. Surface quality for rotary ultrasonic milling of quartz glass employing diamond ball end tool with tool inclination angle[C]. 见:. NOV 28-30, 2016. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。