Effect of Substrate Preheating on Adhesive Strength of SS 316L Cold Spray Coatings
文献类型：会议论文
| 作者 | Xie, Yingchun; Planche, Marie-Pierre; Raoelison, Rija; Liao, Hanlin; Suo, Xinkun; Herve, Philippe |
| 出版日期 | 2016 |
| 会议日期 | MAY 11-14, 2015 |
| 关键词 | GAS-DYNAMIC-SPRAY BONDING STRENGTH POWDER PARTICLES DEPOSITION MECHANISM MICROSTRUCTURE TEMPERATURE BEHAVIOR SURFACE FILM |
| 卷号 | 25 |
| 期号 | 2021-01-02 |
| DOI | 10.1007/s11666-015-0312-5 |
| 英文摘要 | This paper aims at improving the adhesive strength of SS 316L coating by substrate preheating (400, 600, and 700 degrees C). The relationships between the adhesive strength of coating/substrate interface and the substrate preheating temperature are discussed. It was found that stronger adhesion is able to occur despite the presence of a thick oxide film on the substrate surface. The preheated substrate surface undergoes a stronger plastic deformation that disrupts the oxide films for obtaining an intimate contact between particle and substrate material. In addition, the oxide films on the substrate surface can prevent the generation of material jet of the substrate. The effects of substrate preheating on the microstructure and hardness were also investigated. |
| 学科主题 | Materials Science |
| ISSN号 | 1059-9630 |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/23494]  |
| 专题 | 会议专题 会议专题_会议论文 |
| 推荐引用方式 GB/T 7714 | Xie, Yingchun,Planche, Marie-Pierre,Raoelison, Rija,et al. Effect of Substrate Preheating on Adhesive Strength of SS 316L Cold Spray Coatings[C]. 见:. MAY 11-14, 2015. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。