Influence of annealing on mechanics behaviors of oxygen-implanted layer on Ti6Al4V by plasma-based ion implantation
文献类型：会议论文
| 作者 | Li Jinlong; Sun Mingren; Ma Xinxin; Huang Feng; Xue Qunji |
| 出版日期 | 2013 |
| 会议日期 | SEP 19-22, 2011 |
| 关键词 | TITANIUM-OXIDE FILMS DEPOSITION DIFFUSION TI6A14V |
| 卷号 | 228 |
| DOI | 10.1016/j.surfcoat.2012.06.001 |
| 英文摘要 | Ti6Al4V was implanted by oxygen plasma based ion implantation at pulsed negative voltages of 50 kV with a fluence of 4 x 10(17) O/cm(2). The implanting temperature of below 180 degrees C was controlled by an oil cooling working table. Subsequent annealing was applied the implanted samples in vacuum at 600 degrees C, 650 degrees C and 700 degrees C, respectively. The influence of annealing conditions on hardness and scratch resistance of the oxygen-implanted layer was investigated. The annealing at a lower temperature below 650 degrees C makes the hardness peak widen and shift into the substrate. Scratch resistance of the oxygen implanted layer also was improved significantly. While the temperature increases to 650 degrees C and 700 degrees C, annealing induces a hardness valley value, which is even far lower than that of the substrate. At the same time, scratch resistance deteriorates for the oxygen implanted layer. All annealing samples have a higher elasticity recover than the implanted samples. Crown Copyright (C) 2012 Published by Elsevier B.V. All rights reserved. |
| 学科主题 | Materials Science ; Physics |
| ISSN号 | 0257-8972 |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/23595]  |
| 专题 | 会议专题 会议专题_会议论文 |
| 推荐引用方式 GB/T 7714 | Li Jinlong,Sun Mingren,Ma Xinxin,et al. Influence of annealing on mechanics behaviors of oxygen-implanted layer on Ti6Al4V by plasma-based ion implantation[C]. 见:. SEP 19-22, 2011. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。