A Rapid Control Prototyping System Design for Temperature Control of Plastic Extruder Based on Labview
文献类型：会议论文
| 作者 | Xu, Jialin; Zuo, Guokun; Chen, Jianhua; Wan, Minhong |
| 出版日期 | 2011 |
| 会议日期 | SEP 09-11, 2011 |
| 英文摘要 | In order to verify the performance of the designed temperature controller of the plastic extruder using supercritical CO2, we developed a Hardware-In-the-Loop (HIL) simulation system. The specified HIL simulation system was founded upon the NI products, while the temperature controller and its accessorial parts were constructed in Matlab/Simulink environment. Labview and Simulink were combined together with NI Simulation Interface Toolkit (SIT), and a friendly Human Machine Interface (HMI) was developed and implemented in the host computer by using TCP/IP protocol for data communication. The result showed that the designed temperature control algorithm had better effect when used in the plastic extruder production field. This HIL simulation system can shorten the development cycle and cost, improve the design level of the control system, and provide a solution to the demonstration of the controller in the real-time mode. Meanwhile, the HMI solved the problem of real-time monitoring in the process of the HIL simulation. What's more, this simulation system can be applied in other process control fields as flow, pressure, etc. |
| 学科主题 | Automation & Control Systems ; Engineering |
| ISBN号 | 978-1-4577-0321-8 |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/23702]  |
| 专题 | 会议专题 会议专题_会议论文 |
| 推荐引用方式 GB/T 7714 | Xu, Jialin,Zuo, Guokun,Chen, Jianhua,et al. A Rapid Control Prototyping System Design for Temperature Control of Plastic Extruder Based on Labview[C]. 见:. SEP 09-11, 2011. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。