Research of the tool orientation optimization with kinematical constraints
文献类型：会议论文
| 作者 | Liu HJ(刘红军); Cao, JingYu; Zhao JB(赵吉宾)
|
| 出版日期 | 2013 |
| 会议名称 | 4th International Conference on Manufacturing Science and Engineering, ICMSE 2013 |
| 会议日期 | March 30-31, 2013 |
| 会议地点 | Dalian, China |
| 关键词 | Clustering algorithms Machine tools Manufacture Optimization |
| 页码 | 2143-2148 |
| 中文摘要 | Drastic change of the tool axis vector for five-axis CNC machining due to avoid global interference, proposed gentle forward, over-backward correction method to optimize the tool axis vector. Established a machine tool axis of rotation angular velocity constraints, and feed coordinate system, through the feed coordinate system adjust the inclination angle and swing angle of the existing tool axis vector to make the tool axis vector change between each adjacent cutter contact points satisfy the machine axis of rotation kinematics constraints and to ensure the continuity of feed rate during processing. Algorithm simulation examples show that the proposed method is reasonably practicable, make the tool axis vector changes fairing to ensure the smooth and efficient processing. © (2013) Trans Tech Publications, Switzerland. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 2 |
| 会议主办者 | Northeastern University; Harbin Institute of Technology; Jilin University; Hong Kong Industrial Technology Research Centre |
| 会议录 | Advanced Materials Research
 |
| 会议录出版者 | Trans Tech Publications Ltd |
| 会议录出版地 | Zurich-Durnten, Switzerland |
| 语种 | 英语 |
| ISSN号 | 1022-6680 |
| ISBN号 | 978-3-03785-724-3 |
| WOS记录号 | WOS:000324222601112 |
| 源URL | [http://ir.sia.cn/handle/173321/12395]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Liu HJ,Cao, JingYu,Zhao JB. Research of the tool orientation optimization with kinematical constraints[C]. 见:4th International Conference on Manufacturing Science and Engineering, ICMSE 2013. Dalian, China. March 30-31, 2013. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。